Difference between revisions of "83Plus:Ports:0A"

From WikiTI
Jump to: navigation, search
m
 
Line 1: Line 1:
−
'''Note:''' Do not take the information on this template page as actual documentation!
+
[[Category:83Plus:Ports:By_Address|0A - Link Assist Input Buffer]]
−
 
+
[[Category:83Plus:Ports:By_Name|Link Assist Input Buffer]]
−
The Ports are named by their number, in hexadecimal. An example is [[83Plus:Ports:00]].
+
−
 
+
−
You also must put a variation on the following code into your page to have it categorized:
+
−
NaodW29-nowiki3327a7ea493057a000000001
+
−
 
+
−
----
+
−
 
+
 
== Synopsis ==
 
== Synopsis ==
−
'''Port Number:''' 06h
+
'''Port Number:''' 0Ah
  
−
'''Function:''' Flash Memory Paging
+
'''Function:''' Link Assist Input Buffer
  
−
This port controls what page is swapped into the 4000h to 7FFFh range. ('''DO NOT''' take this template page as real documentation on port 6!)
+
This port allows you to read the data that has been received by the link assist.
  
 
=== Read Values ===
 
=== Read Values ===
−
* [00h - FFh]: The current port mapped to the memory range 4000h through 7FFFh.
+
* [00h - FFh]: Byte currently in the link assist's buffer.
  
 
=== Write Values ===
 
=== Write Values ===
−
* [00h - FFh]: The new page to swap in to the memory range 4000h through 7FFFh
+
''None''
  
−
''Note: if you would have bitwise flags for your port, label them "bit X".''
+
== Comments ==
 +
This port only exists on the 83+ SE and the 84+.
  
−
== Comments ==
+
Check [[83Plus:Ports:09|port 9]] before you read this port, to see that there is valid data.  Also, do not read this port more than once per data byte received.
−
The behavior of this port changes in different memory map modes.
+
  
 
== Example ==
 
== Example ==
−
  NaodW29-nowiki3327a7ea493057a000000002
+
  <nowiki>GetByteSE:
 +
in a,(4)
 +
and 8
 +
jr z,LinkError
 +
in a,(9)
 +
bit 6,a
 +
jr nz,LinkError
 +
and 11h
 +
jr z,GetByteSE
 +
in a,(0Ah)
 +
ret</nowiki>
  
 
== Credits and Contributions ==
 
== Credits and Contributions ==
−
* '''/dev/urandom:''' Because of your randomness, this project is possible.
+
* '''Michael Vincent:''' Original documentation of the link assist

Revision as of 19:37, 28 March 2005

Synopsis

Port Number: 0Ah

Function: Link Assist Input Buffer

This port allows you to read the data that has been received by the link assist.

Read Values

  • [00h - FFh]: Byte currently in the link assist's buffer.

Write Values

None

Comments

This port only exists on the 83+ SE and the 84+.

Check port 9 before you read this port, to see that there is valid data. Also, do not read this port more than once per data byte received.

Example

GetByteSE:
	in a,(4)
	and 8
	jr z,LinkError
	in a,(9)
	bit 6,a
	jr nz,LinkError
	and 11h
	jr z,GetByteSE
	in a,(0Ah)
	ret

Credits and Contributions

  • Michael Vincent: Original documentation of the link assist
Retrieved from "https://wikiti.brandonw.net/index.php?title=83Plus:Ports:0A&oldid=636"