Difference between revisions of "84PCE:Ports:1002"
From WikiTI
Calc84maniac (Talk | contribs) (→Bit 3) |
|||
(3 intermediate revisions by one other user not shown) | |||
Line 1: | Line 1: | ||
− | [[Category:84PCE:Ports:By_Address|1002 - | + | [[Category:84PCE:Ports:By_Address|1002 - Flash chip size]] [[Category:84PCE:Ports:By_Name|Flash chip size]] |
== Synopsis == | == Synopsis == | ||
'''Port Number:''' 1002 | '''Port Number:''' 1002 | ||
Line 6: | Line 6: | ||
== Details == | == Details == | ||
− | === Bits [ | + | === Bits [2:0] === |
− | Sets the flash chip size. 06 is the default (4 MB). 07 will map 8 MB, which will cause the 4 MB to be mirrored twice | + | Sets the flash chip size. 06 is the default (4 MB). 07 will map 8 MB, which will cause the 4 MB to be mirrored twice. Smaller values map less flash, possibly down to 64 K. |
+ | |||
+ | === Bit 3 === | ||
+ | When this bit is set, the flash mapping is forced to 64KB (the equivalent of a 0 in bits 0-2). | ||
=== Bits [7:4] === | === Bits [7:4] === | ||
Writes have no apparent effect, value does not latch. | Writes have no apparent effect, value does not latch. |
Revision as of 14:47, 5 April 2015
Synopsis
Port Number: 1002
Function: Memory-mapped flash chip size.
Details
Bits [2:0]
Sets the flash chip size. 06 is the default (4 MB). 07 will map 8 MB, which will cause the 4 MB to be mirrored twice. Smaller values map less flash, possibly down to 64 K.
Bit 3
When this bit is set, the flash mapping is forced to 64KB (the equivalent of a 0 in bits 0-2).
Bits [7:4]
Writes have no apparent effect, value does not latch.