Difference between revisions of "84PCE:Ports:1005"

From WikiTI
Jump to: navigation, search
(RAM wait states update)
Line 5: Line 5:
 
'''Memory-mapped Address:''' E00005
 
'''Memory-mapped Address:''' E00005
  
'''Function:''' Controls flash wait states. Each read from flash will have at least 6 wait states, plus the number of wait states specified in this port. The OS defaults to 04 in this port, so by default, every read from flash incurs a 10 wait state penalty. (V/RAM gets 4 wait states.)
+
'''Function:''' Controls flash wait states. Each read from flash will have at least 6 wait states, plus the number of wait states specified in this port. The OS defaults to 04 in this port, so by default, every read from flash incurs a 10 wait state penalty. (V/RAM gets 4 wait states for reads, 2 for writes.)
  
 
== Details ==
 
== Details ==

Revision as of 20:11, 3 April 2015

Synopsis

Port Number: 1005

Memory-mapped Address: E00005

Function: Controls flash wait states. Each read from flash will have at least 6 wait states, plus the number of wait states specified in this port. The OS defaults to 04 in this port, so by default, every read from flash incurs a 10 wait state penalty. (V/RAM gets 4 wait states for reads, 2 for writes.)

Details

Value    Effect   
00 Instant hard crash & reset if OS ISR is enabled
01 Makes OS a little faster, perhaps 30 %
02-03 No ill-effects
04 Normal value
10 OS feels noticeably sluggish
20 OS is unbearably sluggish, RAM program dummy loop is not slower
FF Don't even bother trying to do anything