Hooks Template

From WikiTI
Revision as of 20:51, 27 March 2005 by JasonM (Talk | contribs)

Jump to: navigation, search

Note: Do not take the information on this template page as actual documentation!

The Hooks are named by their hook pointer block address (the four bytes consisting of page, address, and an extra byte), in hexadecimal. An example is 83Plus:Hooks:9B84.


Synopsis

Name: ImAHook

Hook Pointer Block Address: 8562

Hook Enable BCALL: 1234

Hook Disable BCALL: 5678

Hook Call BCALL: 9012

Hook Active Flag: 6, (iy + 23h)

This hook allows you to change the values that GetKey returns.

Using the Hook

These different values, passed in a, determines what the hook should do.

  • 1: The calculator just turned on. There seem to be no other values passed to the hook.
  • 2: The calculator is computing 1+1.
    • b: 1
    • c: 1
    • Change b and/or c to affect the output of the problem (which will still look like 1+1 to the user).
  • 3: Preparing to turn off due to 2nd+OFF.
    • Zero flag: Clear to abort the power off.

Comments

This hook doesn't exist. This is a demonstration only.

Credits and Contributions

  • /dev/hda1: My favorite hard drive partition.