83Plus:Software:usb8x/Error Codes - Revision history

FloppusMaximus: Added hexadecimal values to the list, because I'm tired of having to translate them all the time. Who uses decimal, anyway? ;)

2010-08-31T03:44:03Z

Added hexadecimal values to the list, because I'm tired of having to translate them all the time. Who uses decimal, anyway? ;)

JoostinOnline: Fixed all links

2009-11-10T16:31:27Z

Fixed all links

Brandonw: typos and grammatical mistakes fixed

2008-05-24T02:59:55Z

typos and grammatical mistakes fixed

Brandonw: Clarifying errMSDCmdRefused

2007-01-07T11:14:02Z

Clarifying errMSDCmdRefused

Brandonw: Two new error codes added

2006-10-20T03:00:50Z

Two new error codes added

Dan Englender: /* Error Codes */ 91.2/4

2006-10-07T05:51:47Z

‎Error Codes: 91.2/4

Brandonw: errMSDFailedCmd added

2006-09-30T11:25:10Z

errMSDFailedCmd added

Dan Englender: /* Error Codes */ FeatureDisabled

2006-09-29T00:17:11Z

‎Error Codes: FeatureDisabled

Dan Englender: linked usb8x.inc

2006-09-19T19:59:29Z

linked usb8x.inc

Dan Englender: badcmd error

2006-09-14T19:55:49Z

badcmd error

@@ Line 2: / Line 2: @@
 == Error Codes ==
 {| border="1" cellpadding="2"  cellspacing="0"
-!Error # !! Name !! Info
+!Error # !! Hex !! Name !! Info
 |-
-|0 || OK || No error occurred
+|0 || 00h || OK || No error occurred
 |-
-|1 || Port82 || The previous command failed or did not terminate.  This generally happens during initialization.
+|1 || 01h || Port82 || The previous command failed or did not terminate.  This generally happens during initialization.
 |-
-|2 || Port91Bit2 || An error condition was detected on an input pipe (Stall)
+|2 || 02h || Port91Bit2 || An error condition was detected on an input pipe (Stall)
 |-
-|3 || Port91Bit4 || An error condition was detected on an input pipe (NAK)
+|3 || 03h || Port91Bit4 || An error condition was detected on an input pipe (NAK)
 |-
-|4 || Port4C || Port 4C did not hold the expected value.  This generally happens during initialization.
+|4 || 04h || Port4C || Port 4C did not hold the expected value.  This generally happens during initialization.
 |-
-|5 || Port4D || Port 4D did not hold the expected value.  This generally happens during initialization.
+|5 || 05h || Port4D || Port 4D did not hold the expected value.  This generally happens during initialization.
 |-
-|6 || Port3A || Port 3A did not hold the expected value.  This generally happens during initialization.
+|6 || 06h || Port3A || Port 3A did not hold the expected value.  This generally happens during initialization.
 |-
-|7 || Port81 || Port 81 did not hold the expected value.  This generally happens during initialization.
+|7 || 07h || Port81 || Port 81 did not hold the expected value.  This generally happens during initialization.
 |-
-|8 || Port8C || The frame counter did not start.  This often indicates low batteries.
+|8 || 08h || Port8C || The frame counter did not start.  This often indicates low batteries.
 |-
-|9 || Port8F || Port 8F did not hold the expected value.  This generally happens during initialization.
+|9 || 09h || Port8F || Port 8F did not hold the expected value.  This generally happens during initialization.
 |-
-|10 || EPIndex || A non-existent entry point was called.  Be sure to check for the minimum required version of usb8x before calling entry points.
+|10 || 0Ah || EPIndex || A non-existent entry point was called.  Be sure to check for the minimum required version of usb8x before calling entry points.
 |-
-|11 || EPGetDes || An unsupported descriptor was requested from [[83Plus:Software:usb8x/Asm_Interface/ReadDescriptor|ReadDescriptor]].
+|11 || 0Bh || EPGetDes || An unsupported descriptor was requested from [[83Plus:Software:usb8x/Asm_Interface/ReadDescriptor|ReadDescriptor]].
 |-
-|12 || NoDevice || No Device is connected.  You'll get this error if you plug in a mini-B cable instead of mini-A.
+|12 || 0Ch || NoDevice || No Device is connected.  You'll get this error if you plug in a mini-B cable instead of mini-A.
 |-
-|13 || FindDescriptor || An error occurred in [[83Plus:Software:usb8x/Asm_Interface/FindDescriptor|FindDescriptor]].  This error may occasionally improperly be listed a sub error code, because AutoSetup generates a FindDescriptor error during normal operation.
+|13 || 0Dh || FindDescriptor || An error occurred in [[83Plus:Software:usb8x/Asm_Interface/FindDescriptor|FindDescriptor]].  This error may occasionally improperly be listed a sub error code, because AutoSetup generates a FindDescriptor error during normal operation.
 |-
-|14 || BadClass || The attached device does not have the required class  (i.e. a keyboard is connected when [[83Plus:Software:usb8x/Asm_Interface/MouseInit|MouseInit]] is called).
+|14 || 0Eh || BadClass || The attached device does not have the required class  (i.e. a keyboard is connected when [[83Plus:Software:usb8x/Asm_Interface/MouseInit|MouseInit]] is called).
 |-
-|15 || Timeout || A timeout occurred while waiting for data.  This currently is only returned by [[83Plus:Software:usb8x/BASIC_Interface/MouseDo|MouseDo]].
+|15 || 0Fh || Timeout || A timeout occurred while waiting for data.  This currently is only returned by [[83Plus:Software:usb8x/BASIC_Interface/MouseDo|MouseDo]].
 |-
-|16 || BadID || The attached device does not have the required vendor or device ID.
+|16 || 10h || BadID || The attached device does not have the required vendor or device ID.
 |-
-|17 || ReadDescriptor || An error occurred in [[83Plus:Software:usb8x/Asm_Interface/ReadDescriptor|ReadDescriptor]].  Check sub error code for additional information.
+|17 || 11h || ReadDescriptor || An error occurred in [[83Plus:Software:usb8x/Asm_Interface/ReadDescriptor|ReadDescriptor]].  Check sub error code for additional information.
 |-
-|18 || Init || An error occurred during initialization.  Check sub error code for more information.
+|18 || 12h || Init || An error occurred during initialization.  Check sub error code for more information.
 |-
-|19 || AutoSetup || An error occurred during [[83Plus:Software:usb8x/Asm_Interface/AutoSetup|AutoSetup]].  Check sub error code for more information.
+|19 || 13h || AutoSetup || An error occurred during [[83Plus:Software:usb8x/Asm_Interface/AutoSetup|AutoSetup]].  Check sub error code for more information.
 |-
-|20 || Demo || An error occurred in demo code.  This should not be returned via either of the programming interfaces.
+|20 || 14h || Demo || An error occurred in demo code.  This should not be returned via either of the programming interfaces.
 |-
-|21 || FindPipe || An error occurred in [[83Plus:Software:usb8x/Asm_Interface/FindPipe|FindPipe]].
+|21 || 15h || FindPipe || An error occurred in [[83Plus:Software:usb8x/Asm_Interface/FindPipe|FindPipe]].
 |-
-|22 || Stub || Returned by stub routines (not current used).
+|22 || 16h || Stub || Returned by stub routines (not current used).
 |-
-|23 || GetMaxPacketSize || An error occurred while trying to determine the maximum supported packet size.
+|23 || 17h || GetMaxPacketSize || An error occurred while trying to determine the maximum supported packet size.
 |-
-|24 || SetAddress || An error occurred while trying to set the device address
+|24 || 18h || SetAddress || An error occurred while trying to set the device address
 |-
-|25 || SendCmd || There was a problem sending mass storage I/O commands
+|25 || 19h || SendCmd || There was a problem sending mass storage I/O commands
 |-
-|26 || LargeSect || Bytes-per-sector is larger than 512 (not supported)
+|26 || 1Ah || LargeSect || Bytes-per-sector is larger than 512 (not supported)
 |-
-|27 || NoParts || There were no FAT16 partitions found on the connected mass storage device
+|27 || 1Bh || NoParts || There were no FAT16 partitions found on the connected mass storage device
 |-
-|28 || NoMoreMemory || The previous function failed because there is no more free memory (this is a very bad thing)
+|28 || 1Ch || NoMoreMemory || The previous function failed because there is no more free memory (this is a very bad thing)
 |-
-|29 || InvalidPartition || The FAT16 partition found is invalid because it does not contain 0AA55h
+|29 || 1Dh || InvalidPartition || The FAT16 partition found is invalid because it does not contain 0AA55h
 |-
-|30 || NotFile || The path passed to a function is to a directory or volume label, not a file
+|30 || 1Eh || NotFile || The path passed to a function is to a directory or volume label, not a file
 |-
-|31 || NotValidPath || The path passed to a function is completely invalid
+|31 || 1Fh || NotValidPath || The path passed to a function is completely invalid
 |-
-|32 || CorruptFile || A file is corrupted or otherwise not as expected
+|32 || 20h || CorruptFile || A file is corrupted or otherwise not as expected
 |-
-|33 || NotFound || File or directory was not found
+|33 || 21h || NotFound || File or directory was not found
 |-
-|34 || DuplicateFound || Duplicate calculator variable was found and not overwritten
+|34 || 22h || DuplicateFound || Duplicate calculator variable was found and not overwritten
 |-
-|35 || NotEnoughMem || There was not enough memory to create the new calculator variable
+|35 || 23h || NotEnoughMem || There was not enough memory to create the new calculator variable
 |-
-|36 || AlreadyExists || An 8x* file of the same name already exists in the current directory
+|36 || 24h || AlreadyExists || An 8x* file of the same name already exists in the current directory
 |-
-|37 || StrNotFound || String variable from BASIC OpenLib/ExecLib function was not found
+|37 || 25h || StrNotFound || String variable from BASIC OpenLib/ExecLib function was not found
 |-
-|38 || VarEmpty || Variable was empty and transfer was not completed (this is a bad thing; delete new, incomplete file)
+|38 || 26h || VarEmpty || Variable was empty and transfer was not completed (this is a bad thing; delete new, incomplete file)
 |-
-|39 || NoParts32 || FAT32 partitions were found, but none were FAT16 (make sure you reformat your drive as FAT16)
+|39 || 27h || NoParts32 || FAT32 partitions were found, but none were FAT16 (make sure you reformat your drive as FAT16)
 |-
-|40 || NoData || There was no data to report.  Returned by [[83Plus:Software:usb8x/BASIC_Interface/KBDGetKey|KBDGetKey]]
+|40 || 28h || NoData || There was no data to report.  Returned by [[83Plus:Software:usb8x/BASIC_Interface/KBDGetKey|KBDGetKey]]
 |-
-|41 || Version || A pre-2.30 version of TI-OS is loaded on the calculator.
+|41 || 29h || Version || A pre-2.30 version of TI-OS is loaded on the calculator.
 |-
-|42 || BadCmd || A requested command failed.  Returned by Vernier driver.
+|42 || 2Ah || BadCmd || A requested command failed.  Returned by Vernier driver.
 |-
-|43 || FeatureDisabled || The feature/driver you tried to call is not compiled into the user's binary.
+|43 || 2Bh || FeatureDisabled || The feature/driver you tried to call is not compiled into the user's binary.
 |-
-|44 || FailedCmd || Mass storage command sent successfully and failed to execute. This is bad.
+|44 || 2Ch || FailedCmd || Mass storage command sent successfully and failed to execute. This is bad.
 |-
-|45 || CmdTimeout || Mass storage command timed out (no response from device at all)
+|45 || 2Dh || CmdTimeout || Mass storage command timed out (no response from device at all)
 |-
-|46 || CmdRefused || All communication attempts were refused (drive has STALLed)
+|46 || 2Eh || CmdRefused || All communication attempts were refused (drive has STALLed)
 |}
 Be aware that the error codes listed on this page are in decimal, while the error codes displayed in USBInfo are in hexadecimal.

@@ Line 1: / Line 1: @@
-Error codes may be returned via both the [[../Asm_Interface|assembly language interface]] and the [[../BASIC_Interface|BASIC interface]].  In the BASIC interface, the error code is returned in the first element of the return list.  In the assembly language interface, an error is generally indicated by a return with the carry flag set.  The error code can then be read via [[../Asm_Interface/GetErrorCode|GetErrorCode]].  Error code equates are located in [http://usb8x.cvs.sourceforge.net/*checkout*/usb8x/usb8x/usb8x.inc usb8x.inc].
+Error codes may be returned via both the [[83Plus:Software:usb8x/Asm_Interface|assembly language interface]] and the [[83Plus:Software:usb8x/BASIC_Interface|BASIC interface]].  In the BASIC interface, the error code is returned in the first element of the return list.  In the assembly language interface, an error is generally indicated by a return with the carry flag set.  The error code can then be read via [[83Plus:Software:usb8x/Asm_Interface/GetErrorCode|GetErrorCode]].  Error code equates are located in [http://usb8x.cvs.sourceforge.net/*checkout*/usb8x/usb8x/usb8x.inc usb8x.inc].
 == Error Codes ==
 {| border="1" cellpadding="2"  cellspacing="0"
@@ Line 26: / Line 26: @@
 |10 || EPIndex || A non-existent entry point was called.  Be sure to check for the minimum required version of usb8x before calling entry points.
 |-
-|11 || EPGetDes || An unsupported descriptor was requested from [[../Asm_Interface/ReadDescriptor|ReadDescriptor]].
+|11 || EPGetDes || An unsupported descriptor was requested from [[83Plus:Software:usb8x/Asm_Interface/ReadDescriptor|ReadDescriptor]].
 |-
 |12 || NoDevice || No Device is connected.  You'll get this error if you plug in a mini-B cable instead of mini-A.
 |-
-|13 || FindDescriptor || An error occurred in [[../Asm_Interface/FindDescriptor|FindDescriptor]].  This error may occasionally improperly be listed a sub error code, because AutoSetup generates a FindDescriptor error during normal operation.
+|13 || FindDescriptor || An error occurred in [[83Plus:Software:usb8x/Asm_Interface/FindDescriptor|FindDescriptor]].  This error may occasionally improperly be listed a sub error code, because AutoSetup generates a FindDescriptor error during normal operation.
 |-
-|14 || BadClass || The attached device does not have the required class  (i.e. a keyboard is connected when [[../Asm_Interface/MouseInit|MouseInit]] is called).
+|14 || BadClass || The attached device does not have the required class  (i.e. a keyboard is connected when [[83Plus:Software:usb8x/Asm_Interface/MouseInit|MouseInit]] is called).
 |-
-|15 || Timeout || A timeout occurred while waiting for data.  This currently is only returned by [[../BASIC_Interface/MouseDo|MouseDo]].
+|15 || Timeout || A timeout occurred while waiting for data.  This currently is only returned by [[83Plus:Software:usb8x/BASIC_Interface/MouseDo|MouseDo]].
 |-
 |16 || BadID || The attached device does not have the required vendor or device ID.
 |-
-|17 || ReadDescriptor || An error occurred in [[../Asm_Interface/ReadDescriptor|ReadDescriptor]].  Check sub error code for additional information.
+|17 || ReadDescriptor || An error occurred in [[83Plus:Software:usb8x/Asm_Interface/ReadDescriptor|ReadDescriptor]].  Check sub error code for additional information.
 |-
 |18 || Init || An error occurred during initialization.  Check sub error code for more information.
 |-
-|19 || AutoSetup || An error occurred during [[../Asm_Interface/AutoSetup|AutoSetup]].  Check sub error code for more information.
+|19 || AutoSetup || An error occurred during [[83Plus:Software:usb8x/Asm_Interface/AutoSetup|AutoSetup]].  Check sub error code for more information.
 |-
 |20 || Demo || An error occurred in demo code.  This should not be returned via either of the programming interfaces.
 |-
-|21 || FindPipe || An error occurred in [[../Asm_Interface/FindPipe|FindPipe]].
+|21 || FindPipe || An error occurred in [[83Plus:Software:usb8x/Asm_Interface/FindPipe|FindPipe]].
 |-
 |22 || Stub || Returned by stub routines (not current used).
@@ Line 84: / Line 84: @@
 |39 || NoParts32 || FAT32 partitions were found, but none were FAT16 (make sure you reformat your drive as FAT16)
 |-
-|40 || NoData || There was no data to report.  Returned by [[../BASIC_Interface/KBDGetKey|KBDGetKey]]
+|40 || NoData || There was no data to report.  Returned by [[83Plus:Software:usb8x/BASIC_Interface/KBDGetKey|KBDGetKey]]
 |-
 |41 || Version || A pre-2.30 version of TI-OS is loaded on the calculator.

@@ Line 4: / Line 4: @@
 !Error # !! Name !! Info
 |-
-|0 || OK || No error occured
+|0 || OK || No error occurred
 |-
 |1 || Port82 || The previous command failed or did not terminate.  This generally happens during initialization.
@@ Line 24: / Line 24: @@
 |9 || Port8F || Port 8F did not hold the expected value.  This generally happens during initialization.
 |-
-|10 || EPIndex || A non existant entry point was called.  Be sure to check for the minimum required version of usb8x before calling entry points.
+|10 || EPIndex || A non-existent entry point was called.  Be sure to check for the minimum required version of usb8x before calling entry points.
 |-
 |11 || EPGetDes || An unsupported descriptor was requested from [[../Asm_Interface/ReadDescriptor|ReadDescriptor]].
 |-
-|12 || NoDevice || No Device is connected.  You'll get this error if you plug in a mini B cable instead of mini A.
+|12 || NoDevice || No Device is connected.  You'll get this error if you plug in a mini-B cable instead of mini-A.
 |-
-|13 || FindDescriptor || An error occured in [[../Asm_Interface/FindDescriptor|FindDescriptor]].  This error may occasionally improperly be listed a sub error code, because AutoSetup generates a FindDescriptor error during normal operation.
+|13 || FindDescriptor || An error occurred in [[../Asm_Interface/FindDescriptor|FindDescriptor]].  This error may occasionally improperly be listed a sub error code, because AutoSetup generates a FindDescriptor error during normal operation.
 |-
-|14 || BadClass || The attached device does not have the required class.  (i.e. a keyboard is connected when [[../Asm_Interface/MouseInit|MouseInit]] is called).
+|14 || BadClass || The attached device does not have the required class  (i.e. a keyboard is connected when [[../Asm_Interface/MouseInit|MouseInit]] is called).
 |-
-|15 || Timeout || A timeout occured while waiting for data.  This currently is only returned by [[../BASIC_Interface/MouseDo|MouseDo]].
+|15 || Timeout || A timeout occurred while waiting for data.  This currently is only returned by [[../BASIC_Interface/MouseDo|MouseDo]].
 |-
 |16 || BadID || The attached device does not have the required vendor or device ID.
 |-
-|17 || ReadDescriptor || An error occured in [[../Asm_Interface/ReadDescriptor|ReadDescriptor]].  Check sub error code for additional information.
+|17 || ReadDescriptor || An error occurred in [[../Asm_Interface/ReadDescriptor|ReadDescriptor]].  Check sub error code for additional information.
 |-
-|18 || Init || An error occured during initialization.  Check sub error code for more information.
+|18 || Init || An error occurred during initialization.  Check sub error code for more information.
 |-
-|19 || AutoSetup || An error occured during [[../Asm_Interface/AutoSetup|AutoSetup]].  Check sub error code for more information.
+|19 || AutoSetup || An error occurred during [[../Asm_Interface/AutoSetup|AutoSetup]].  Check sub error code for more information.
 |-
-|20 || Demo || An error occured in demo code.  This should not be returned via either of the programming interfaces.
+|20 || Demo || An error occurred in demo code.  This should not be returned via either of the programming interfaces.
 |-
-|21 || FindPipe || An error occured in [[../Asm_Interface/FindPipe|FindPipe]].
+|21 || FindPipe || An error occurred in [[../Asm_Interface/FindPipe|FindPipe]].
 |-
 |22 || Stub || Returned by stub routines (not current used).
 |-
-|23 || GetMaxPacketSize || An error occured while trying to determine the maximum supported packet size.
+|23 || GetMaxPacketSize || An error occurred while trying to determine the maximum supported packet size.
 |-
-|24 || SetAddress || An error occured while trying to set the device address
+|24 || SetAddress || An error occurred while trying to set the device address
 |-
 |25 || SendCmd || There was a problem sending mass storage I/O commands
@@ Line 86: / Line 86: @@
 |40 || NoData || There was no data to report.  Returned by [[../BASIC_Interface/KBDGetKey|KBDGetKey]]
 |-
-|41 || Version || A pre-2.30 version of TIOS is loaded on the calculator.
+|41 || Version || A pre-2.30 version of TI-OS is loaded on the calculator.
 |-
 |42 || BadCmd || A requested command failed.  Returned by Vernier driver.

@@ Line 96: / Line 96: @@
 |45 || CmdTimeout || Mass storage command timed out (no response from device at all)
 |-
-|46 || CmdRefused || All communication attempts were refused (I have no idea what this means)
+|46 || CmdRefused || All communication attempts were refused (drive has STALLed)
 |}
 Be aware that the error codes listed on this page are in decimal, while the error codes displayed in USBInfo are in hexadecimal.

@@ Line 93: / Line 93: @@
 |-
 |44 || FailedCmd || Mass storage command sent successfully and failed to execute. This is bad.
 |}
 Be aware that the error codes listed on this page are in decimal, while the error codes displayed in USBInfo are in hexadecimal.