Difference between revisions of "83Plus:Ports:8C"
From WikiTI
Thepenguin77 (Talk | contribs) |
|||
| Line 3: | Line 3: | ||
== Synopsis == | == Synopsis == | ||
'''Port Number:''' 8Ch (LSB), 8Dh (MSB) | '''Port Number:''' 8Ch (LSB), 8Dh (MSB) | ||
| + | |||
| + | '''Equivalent HDRC port:''' MGC_O_HDRC_FRAME 0x0C | ||
'''Function:''' USB Frame Counter | '''Function:''' USB Frame Counter | ||
Latest revision as of 13:21, 14 August 2013
| This port only exists on the the TI-84 Plus and the TI-84 Plus Silver Edition. On the standard TI-83 Plus, it acts as a shadow of port 04. On the TI-83 Plus Silver Edition, this port has no effect. |
Synopsis
Port Number: 8Ch (LSB), 8Dh (MSB)
Equivalent HDRC port: MGC_O_HDRC_FRAME 0x0C
Function: USB Frame Counter
These ports show the current value of the USB frame counter.
Read Values
- Port 8C: Bits 0-7 of the frame counter.
- Port 8D: Bits 8-10 of the frame counter.
Write Values
- No effect
Comments
These two ports indicate the frame counter value used (presumably) in the most recently sent or received start-of-frame packet. (In normal operation, SOFs are sent by the host, once per millisecond, and contain an 11-bit counter value.) These ports can be used for timing, or simply as an indication that USB is working (since the USB controller will not generate SOFs unless a device is connected.)
