Difference between revisions of "84PCE:Ports:003A"

From WikiTI
Jump to: navigation, search
m
Line 5: Line 5:
 
'''Function:''' Stack Protector Ports
 
'''Function:''' Stack Protector Ports
  
This range of ports holds the location of the bottom of the stack. When the the default address D19881 is written to, a non-maskable interrupt is generated which resets the calculator, clearing all of RAM. This could potentially have uses such as a hardware write breakpoint in z80 mode.
+
This range of ports holds the location of the bottom of the stack. When the default address D19881 is written to, a non-maskable interrupt is generated which resets the calculator, clearing all of RAM. This could potentially have uses such as a hardware write breakpoint in z80 mode.
  
 
==Example==
 
==Example==

Revision as of 02:26, 26 May 2016

Synopsis

Port Number: 003A-003C

Function: Stack Protector Ports

This range of ports holds the location of the bottom of the stack. When the default address D19881 is written to, a non-maskable interrupt is generated which resets the calculator, clearing all of RAM. This could potentially have uses such as a hardware write breakpoint in z80 mode.

Example

Since the stack protector is extremely simple, this equally simple program will cause a crash.

ld (0D19881h),a
ret