Difference between revisions of "84PCE:Ports:0009"
From WikiTI
(Add documentation on bit 4) |
(→Bit [2]: LCD /RESET) |
||
| Line 13: | Line 13: | ||
=== Bit [2] === | === Bit [2] === | ||
| − | + | Likely connected to the LCD's reset line, which is active low. After being set, the LCD must be given a sequence of initialization commands before it can display an image again. | |
=== Bit [3] === | === Bit [3] === | ||
Revision as of 22:02, 24 May 2022
Synopsis
Port Number: 0009
Function: GPIO A Output
Details
These GPIOs appear to be connected to power control.
Bits [1:0]
Latches value written, no apparent effect.
Bit [2]
Likely connected to the LCD's reset line, which is active low. After being set, the LCD must be given a sequence of initialization commands before it can display an image again.
Bit [3]
Latches value written, no apparent effect.
Bit [4]
SPI slave select - reset to communicate with the LCD, set to communicate with the Python coprocessor.
Bits [7:5]
Latches value written, no apparent effect.
