Difference between revisions of "83Plus:OS:84 Plus USB Information"
m |
m |
||
| Line 27: | Line 27: | ||
I'm, err, not exactly clear at this point how the app actually gets the temperature data from the EasyTemp probe, as the entry point seem to only be called on init and quit. The callback routine seemed a likely candidate, but it's not that either. Maybe there's something going on in the interrupt that I'm not aware of. Or maybe there are some more entry points used that I missed. | I'm, err, not exactly clear at this point how the app actually gets the temperature data from the EasyTemp probe, as the entry point seem to only be called on init and quit. The callback routine seemed a likely candidate, but it's not that either. Maybe there's something going on in the interrupt that I'm not aware of. Or maybe there are some more entry points used that I missed. | ||
| + | |||
| + | |||
| + | A BCALL to 5290 alone is enough to turn on the LED on EasyTemp. (Though it turns on to a strange orange color which is never seen during EasyData execution). It must do some sort of USB initialization type stuff. | ||
Revision as of 22:07, 23 May 2005
OK, I've started this talk page to post information about the 84 Plus USB. This isn't the ideal place, since not all of this stuff has to do with entry point 5254, but it'll have to do. If anyone else would like to contribute any information or thoughts, please do so. Much of this data has been discovered by analyzing how the EasyData application interacts with the EasyTemp probe. --Dan Englender 22:32, 23 May 2005 (PDT)
The USB entry points that Easy Data uses are:
5254 5257 525A 525D 5260
These routines return carry flag with an error code in A on failure, or no carry on success. On success they return BC=(9C16), DE=(9C1A), and HL=(9C18). I have no idea what these values are.
The entry points seem to be called only on initialization and quit. On initialization 5254 then 525D are called, and then 525A six times. On quit, 5254, then 5260, then 5257 are called.
The 5254 entry point seems to take a callback address to be passed in A (page) and HL (address). That callback address appears to be called on quit, after 5257 is called.
The 5260 and 5257 entry points are called right after each other in the code, and don't seem to take any input. I guess they're some kind of USB shut down. 5260 doesn't do much of anything other than set 9C1E to 0000. 5257 plays with the ports some, and then clears the callback address. Since the call back address gets called, I'm assuming it must also call the callback address somewhere in there.
525A and 525D take some kind of pointer in HL. I'm not sure what yet. The 525D entry point first checks to see if bit 3 of port 4C and bits 0 and 2 of port 8F are set. If they are not, it returns failure. These bits are not set by, say, plugging in the hardware. They are set, however, after 5254 has been called. After checking these bits, 9C1E is set to the passed value of HL. If this value is zero, the routine will return failure. A value of 1 will be stored to HL+2, then a value of 1 will be output to port 8E, a value of 20h to port 94h, and success will be returned.
The callback routine appears to recieve some kind of input in B. I'm not sure what yet.
I'm, err, not exactly clear at this point how the app actually gets the temperature data from the EasyTemp probe, as the entry point seem to only be called on init and quit. The callback routine seemed a likely candidate, but it's not that either. Maybe there's something going on in the interrupt that I'm not aware of. Or maybe there are some more entry points used that I missed.
A BCALL to 5290 alone is enough to turn on the LED on EasyTemp. (Though it turns on to a strange orange color which is never seen during EasyData execution). It must do some sort of USB initialization type stuff.
