Difference between revisions of "83Plus:RAM:8447"
From WikiTI
m (Formatting fun) |
(→Comments: example comments, linkage, use of 000B) |
||
| (One intermediate revision by one other user not shown) | |||
| Line 5: | Line 5: | ||
'''Memory Address:''' 8447h | '''Memory Address:''' 8447h | ||
| − | '''Length:''' 1 byte | + | '''Length:''' 1 byte |
| − | This area holds the system contrast value. When you press 2nd+Up or 2nd+Down while in a GetKey, GetKey automatically increases or decreases this value and updates the LCD's contrast. The accepted range of this value is 00h ~ 27h. | + | This area holds the system contrast value. When you press 2nd+Up or 2nd+Down while in a [[83Plus:BCALLs:4972|GetKey]], GetKey automatically increases or decreases this value and updates the LCD's contrast. The accepted range of this value is 00h ~ 27h. |
== Comments == | == Comments == | ||
Changing this value does not "instantly" update the LCD contrast; you must manually update the LCD. To set the LCD contrast to match the calculator's, add D8h to the read value and output to [[83Plus:Ports:10|Port 10h]]: | Changing this value does not "instantly" update the LCD contrast; you must manually update the LCD. To set the LCD contrast to match the calculator's, add D8h to the read value and output to [[83Plus:Ports:10|Port 10h]]: | ||
| − | + | ld a, (contrast) | |
add a, 0D8h | add a, 0D8h | ||
| − | out (10h), a | + | CALL 000Bh ; Wait for LCD driver to be ready |
| − | + | out [[83Plus:Ports:10|(10h)]], a | |
This simple routine sets both the system contrast and the LCD contrast to whatever is in A (valid range is 00~27h, does nothing if out of range). | This simple routine sets both the system contrast and the LCD contrast to whatever is in A (valid range is 00~27h, does nothing if out of range). | ||
| − | + | cp 28h | |
| − | ret nc ; | + | ret nc ; return if the value given is >= 28h |
ld (contrast), a | ld (contrast), a | ||
push af | push af | ||
add a, 0D8h | add a, 0D8h | ||
| − | out (10h), a | + | CALL 000Bh ; Wait for LCD driver to be ready |
| + | out [[83Plus:Ports:10|(10h)]], a | ||
pop af | pop af | ||
ret | ret | ||
| − | |||
Latest revision as of 13:46, 21 April 2005
Synopsis
Official Name: contrast
Memory Address: 8447h
Length: 1 byte
This area holds the system contrast value. When you press 2nd+Up or 2nd+Down while in a GetKey, GetKey automatically increases or decreases this value and updates the LCD's contrast. The accepted range of this value is 00h ~ 27h.
Comments
Changing this value does not "instantly" update the LCD contrast; you must manually update the LCD. To set the LCD contrast to match the calculator's, add D8h to the read value and output to Port 10h:
ld a, (contrast) add a, 0D8h CALL 000Bh ; Wait for LCD driver to be ready out (10h), a
This simple routine sets both the system contrast and the LCD contrast to whatever is in A (valid range is 00~27h, does nothing if out of range).
cp 28h ret nc ; return if the value given is >= 28h ld (contrast), a push af add a, 0D8h CALL 000Bh ; Wait for LCD driver to be ready out (10h), a pop af ret
