Difference between revisions of "83Plus:Software:usb8x/Asm Interface/MSD"

Revision as of 22:12, 16 August 2006

The mass storage driver works through a series of U_CALL entry points, much like the HID driver.

It requires two RAM buffers, one for internal use and one for a sector buffer. File handles used for opened files (explained later) also require around 27 bytes. The size of all three of these buffers can be obtained through the MSDVersion U_CALL. The size of the internal buffer is typically 254 bytes and the sector buffer is 512 bytes.

The entry point which requires these buffers is the MSD_Initialize U_CALL. Its memory can be dynamically allocated to appBackUpScreen (taking up practically all of it) with the code below:

U_CALL MSDVersion
ld de,appBackUpScreen
push de
add hl,de
ex de,hl
pop hl
U_CALL MSD_Initialize

For file system operations, you will then make calls to UFI_Initialize and FAT_Initialize. All entry points will return with the carry flag set if there are problems, with more detailed information in offErrorCode.

If all three of these U_CALLs succeed, the following entry points can then be called.

Entry Points