84PCE:Ports:3000: Difference between revisions

From WikiTI
Jump to navigationJump to search
I found the USB function address.
No edit summary
 
(5 intermediate revisions by 2 users not shown)
Line 7: Line 7:
'''Function:''' USB
'''Function:''' USB


This range of ports appears to be the USB controller.
This is the USB controller. It's the Faraday FOTG210. You can find Linux drivers for this IP online, such as this register list: [http://lists.denx.de/pipermail/u-boot/2013-April/152827.html].




Line 15: Line 15:
|<u>Bits</u>&nbsp;&nbsp;&nbsp;
|<u>Bits</u>&nbsp;&nbsp;&nbsp;
|<u>Information</u>&nbsp;&nbsp;&nbsp;
|<u>Information</u>&nbsp;&nbsp;&nbsp;
|-
|[[:84PCE:Ports:000F|000F]]
|
|FF
|Bit 7 is set if the USB bus is receiving power, Bit 6 is set if the the USB bus is self powered (i.e. there's not a plug A type in the socket)
|-
|-
|-
|[[:84PCE:Ports:3104|3104]]
|[[:84PCE:Ports:3104|3104]]

Latest revision as of 05:28, 25 May 2016

Synopsis

Port Number: 3000-?

Memory-mapped Address: E20000

Function: USB

This is the USB controller. It's the Faraday FOTG210. You can find Linux drivers for this IP online, such as this register list: [1].


Port    Default    Bits    Information   
000F FF Bit 7 is set if the USB bus is receiving power, Bit 6 is set if the the USB bus is self powered (i.e. there's not a plug A type in the socket)
3104 FF In peripheral mode, the low 7 bits are the USB device address, and the upper bit is set.