83Plus:Hooks:9B8C: Difference between revisions

From WikiTI
Jump to navigationJump to search
No edit summary
 
m The Homescreen Hook was never called the Font Hook...that is its own hook, and the localize hook may have been called that
 
(7 intermediate revisions by 4 users not shown)
Line 1: Line 1:
'''Note:''' Do not take the information on this template page as actual documentation!
[[Category:83Plus:Hooks:By_Name|Homescreen Hook]] [[Category:83Plus:Hooks:By_Address|9B8C - Homescreen Hook]]
 
The Hooks are named by their hook pointer block address (the four bytes consisting of page, address, and an extra byte), in hexadecimal. An example is [[83Plus:Hooks:9B84]].
 
----
 
== Synopsis ==
== Synopsis ==
'''Name:''' ImAHook
'''Official Name:''' Homescreen Hook


'''Hook Pointer Block Address:''' [[83Plus:RAM:8562|8562]]
'''Hook Pointer Block Address:''' [[83Plus:RAM:9B8C|9B8C]]


'''Hook Enable BCALL:''' [[83Plus:BCALLs:1234|1234]]
'''Hook Enable BCALL:''' [[83Plus:BCALLs:4FAB|4FAB]]


'''Hook Disable BCALL:''' [[83Plus:BCALLs:5678|5678]]
'''Hook Disable BCALL:''' [[83Plus:BCALLs:4FAE|4FAE]]


'''Hook Call BCALL:''' [[83Plus:BCALLs:9012|9012]]
'''Hook Call BCALL:''' ''(none known)''


'''Hook Active Flag:''' 6, (iy + 23h)
'''Hook Active Flag:''' [[83Plus:Flags:34#Bit_4|4, (iy + 34h)]]


This hook allows you to change the values that [[83Plus:BCALLs:4972|GetKey]] returns.
This hook is called when various events occur on the homescreen.


== Using the Hook ==
== Using the Hook ==
These different values, passed in a, determines what the hook should do.
These different values, passed in A, determine what the hook should do.
* 1: The calculator just turned on. There seem to be no other values passed to the hook.
* 0: The calculator is displaying a result.
* 2: The calculator is computing 1+1.
** [[83Plus:RAM:8478|OP1]] = the value to display
** b: 1
** You can change the value in OP1 to display something different, which will not affect the value stored to Ans.
** c: 1
** If you want to display something wider than the screen, you must also write the formatted string to [[83Plus:RAM:97B1|fmtString]].
** Change b and/or c to affect the output of the problem (which will still look like 1+1 to the user).
** Return NZ and TIOS will not display anything.
* 3: Preparing to turn off due to 2nd+OFF.
* 1: A key was pressed at the homescreen.
** Zero flag: Clear to abort the power off.
** B = keycode
** Change B to change the key that appears to be pressed.
** Return NZ to ignore the keypress.
* 2: An expression was entered to be evaluated.
** OP1 contains prgm!.
** To retreive the expression to be evaluated use prgm#.
** Return NZ to cancel running the program.
* 3: Changing context to the homescreen.
** B = previous context value
** You should always return Z in this case.
 
== Example ==
The following code will display a random number as the result of any calculation.


== Comments ==
<nowiki>HomescreenHook:
This hook doesn't exist. This is a demonstration only.
        .db 83h            ; Required for all hooks
        or a               ; are we in condition 0 (display value?)
        jr nz,ReturnZ
        B_CALL Random      ; change our output value to a random #
ReturnZ:
        cp a                ; set zero condition
        ret</nowiki>


== Credits and Contributions ==
== Credits and Contributions ==
* '''/dev/hda1:''' My favorite hard drive partition.
* '''Michael Vincent:''' Analysis and writing the most amazingly cool homescreen hacks I've seen yet.

Latest revision as of 01:33, 5 October 2008

Synopsis

Official Name: Homescreen Hook

Hook Pointer Block Address: 9B8C

Hook Enable BCALL: 4FAB

Hook Disable BCALL: 4FAE

Hook Call BCALL: (none known)

Hook Active Flag: 4, (iy + 34h)

This hook is called when various events occur on the homescreen.

Using the Hook

These different values, passed in A, determine what the hook should do.

  • 0: The calculator is displaying a result.
    • OP1 = the value to display
    • You can change the value in OP1 to display something different, which will not affect the value stored to Ans.
    • If you want to display something wider than the screen, you must also write the formatted string to fmtString.
    • Return NZ and TIOS will not display anything.
  • 1: A key was pressed at the homescreen.
    • B = keycode
    • Change B to change the key that appears to be pressed.
    • Return NZ to ignore the keypress.
  • 2: An expression was entered to be evaluated.
    • OP1 contains prgm!.
    • To retreive the expression to be evaluated use prgm#.
    • Return NZ to cancel running the program.
  • 3: Changing context to the homescreen.
    • B = previous context value
    • You should always return Z in this case.

Example

The following code will display a random number as the result of any calculation.

HomescreenHook:
        .db 83h             ; Required for all hooks
        or a                ; are we in condition 0 (display value?)
        jr nz,ReturnZ
        B_CALL Random      ; change our output value to a random #
ReturnZ:
        cp a                ; set zero condition
        ret

Credits and Contributions

  • Michael Vincent: Analysis and writing the most amazingly cool homescreen hacks I've seen yet.