68k:Ports:600000: Difference between revisions
From WikiTI
Jump to navigationJump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
[[Category:68k:Ports:By Address|600000]] [[Category:68k:Ports:By Name|Battery Voltage]] | [[Category:68k:Ports:By Address|600000]] [[Category:68k:Ports:By Name|Battery Voltage / 92 LCD contrast]] | ||
This port controls I/O from pins 99 and 100 on the ASIC. It's used to check battery voltage on all calcs, and to control LCD contrast on the TI-92. | This port controls I/O from pins 99 and 100 on the ASIC. It's used to check battery voltage on all calcs, and to control LCD contrast on the TI-92. | ||
* Bit 7: Pin 100 output enable (keep =0) | |||
* Bit 6: Pin 99 output enable (keep =0) | |||
* Bit 5: Data to pin 100 (TI-92: used for LSB of LCD contrast) | |||
* Bit 4: Data to pin 99 (not used) | |||
* Bit 3: Data from pin 100 (not used) | |||
* Bit 2: Data from pin 99 (1 if batt. voltage is above trigger level (see [[68k:Ports:600018|600018]]) | |||
Latest revision as of 03:20, 5 June 2006
This port controls I/O from pins 99 and 100 on the ASIC. It's used to check battery voltage on all calcs, and to control LCD contrast on the TI-92.
- Bit 7: Pin 100 output enable (keep =0)
- Bit 6: Pin 99 output enable (keep =0)
- Bit 5: Data to pin 100 (TI-92: used for LSB of LCD contrast)
- Bit 4: Data to pin 99 (not used)
- Bit 3: Data from pin 100 (not used)
- Bit 2: Data from pin 99 (1 if batt. voltage is above trigger level (see 600018)