Difference between revisions of "83Plus:Software:usb8x/Asm Interface"

From WikiTI
Jump to: navigation, search
(Reformatting....)
m (Link target was wrong)
 
(15 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
Many usb8x functions can be used by other programs/applications through usb8x's assembly language U_CALL interface.  Macros are provded in usb8x.inc to simplify the process.  The macros require a 32-byte RAM buffer defined as USBDriverCall.  The U_CALL system must be initialized by the application as follows:
 
Many usb8x functions can be used by other programs/applications through usb8x's assembly language U_CALL interface.  Macros are provded in usb8x.inc to simplify the process.  The macros require a 32-byte RAM buffer defined as USBDriverCall.  The U_CALL system must be initialized by the application as follows:
 
  U_CALL_INIT CallBackRoutine
 
  U_CALL_INIT CallBackRoutine
−
Where CallBackRoutine is a subroutine that will be called when data arrives on the USB port.  If U_CALL_INIT returns carry, usb8x is not loaded on the calculator.
+
Where CallBackRoutine is a subroutine that will be called when data arrives on the USB port.  Some internal drivers override the user supplied callback address, but you must still provide one.  If U_CALL_INIT returns carry, usb8x is not loaded on the calculator.
  
  
−
After the U_CALL system has been initialized with U_CALL_INIT, use the U_CALL macro to call usb8x entry points.  Be sure to call [[/HostKill|HostKill]] and [[/DriverKill|DriverKill]] before quitting your program.
+
After the U_CALL system has been initialized with U_CALL_INIT, use the U_CALL macro to call usb8x entry points.  The first entry point you should call is [[83Plus:Software:usb8x/Asm_Interface/DriverInit|DriverInit]] as most other entry points require the driver be initialized before use.  '''Be sure to call [[83Plus:Software:usb8x/Asm_Interface/HostKill|HostKill]] and [[83Plus:Software:usb8x/Asm_Interface/DriverKill|DriverKill]] before quitting your program.'''
  
 
==Internal Drivers==
 
==Internal Drivers==
Line 11: Line 11:
 
{| border="1" cellpadding="2"  cellspacing="0"  
 
{| border="1" cellpadding="2"  cellspacing="0"  
 
|-
 
|-
−
|[[/MSD|Mass Storage]] || Communicate with flash drives, hard drives, and other devices conforming to the USB MSD standard.
+
|[[83Plus:Software:usb8x/Asm_Interface/MSD|Mass Storage]] || Communicate with flash drives, hard drives, and other devices conforming to the USB MSD standard.
 
|-
 
|-
−
|[[/Mouse|Mouse]] || Communicate with mice and other pointing devices conforming to the USB HID mouse standard.
+
|[[83Plus:Software:usb8x/Asm_Interface/Mouse|Mouse]] || Communicate with mice and other pointing devices conforming to the USB HID mouse standard.
 
|-
 
|-
−
|[[/KBD|Keyboard]] || Communicate with keyboards comforming to the USB HID keyboard standard.
+
|[[83Plus:Software:usb8x/Asm_Interface/KBD|Keyboard]] || Communicate with keyboards comforming to the USB HID keyboard standard.
 +
|-
 +
|[[83Plus:Software:usb8x/Asm_Interface/Silver|SilverLink]] || Use the TI-Graphlink SilverLink to communicate with another calculator.
 +
|-
 +
|[[83Plus:Software:usb8x/Asm_Interface/Pad|GamePad]] || Communicate with compatible gamepad controllers.
 +
|-
 +
|[[83Plus:Software:usb8x/Asm_Interface/Vernier|Vernier]] || Communicate with [http://www.vernier.com/easy/easytemp.html EasyTemp] or other Vernier devices.
 
|}
 
|}
−
 
  
 
==High Level Entry Points==
 
==High Level Entry Points==
 
The following entry points may be useful for any program using usb8x, whether it be using an internal driver or low level entry points to create a new driver.
 
The following entry points may be useful for any program using usb8x, whether it be using an internal driver or low level entry points to create a new driver.
−
 
+
{| border="1" cellpadding="2"  cellspacing="0"
 +
|-
 +
|[[83Plus:Software:usb8x/Asm_Interface/DriverInit|DriverInit]] || Initialize the USB driver
 +
|-
 +
|[[83Plus:Software:usb8x/Asm_Interface/DriverKill|DriverKill]] || Uninitialize the USB driver
 +
|-
 +
|[[83Plus:Software:usb8x/Asm_Interface/GetErrorCode|GetErrorCode]] || Returns the current error and sub-error codes
 +
|-
 +
|[[83Plus:Software:usb8x/Asm_Interface/GetVersion|GetVersion]] || Returns the current driver version
 +
|-
 +
|[[83Plus:Software:usb8x/Asm_Interface/HostKill|HostKill]] || Uninitialize a USB device
 +
|-
 +
|[[83Plus:Software:usb8x/Asm_Interface/IsDeviceConnected|IsDeviceConnected]] || Tests if a device is connected to the USB port
 +
|-
 +
|[[83Plus:Software:usb8x/Asm_Interface/WaitTimerB|WaitTimerB]] || Precise delay
 +
|}
  
 
==Low Level Entry Points==
 
==Low Level Entry Points==
Line 27: Line 47:
 
{| border="1" cellpadding="2"  cellspacing="0"  
 
{| border="1" cellpadding="2"  cellspacing="0"  
 
|-
 
|-
−
|[[/AutoSetup|AutoSetup]] || Automatically sets up USB device
+
|[[83Plus:Software:usb8x/Asm_Interface/AutoSetup|AutoSetup]] || Automatically sets up USB device
 +
|-
 +
|[[83Plus:Software:usb8x/Asm_Interface/ConfigureDevice|ConfigureDevice]] || Chooses a device configuration
 
|-
 
|-
−
|[[/ConfigureDevice|ConfigureDevice]] || Chooses a device configuration
+
|[[83Plus:Software:usb8x/Asm_Interface/FindDescriptor|FindDescriptor]] || Finds a specific descriptor in a list
 
|-
 
|-
−
|[[/DriverInit|DriverInit]] || Initialize the USB driver
+
|[[83Plus:Software:usb8x/Asm_Interface/FindPipe|FindPipe]] || Finds a pipe matching characteristics
 
|-
 
|-
−
|[[/DriverKill|DriverKill]] || Uninitialize the USB driver
+
|[[83Plus:Software:usb8x/Asm_Interface/GetClass|GetClass]] || Returns the class and subclass for the current device
 
|-
 
|-
−
|[[/FindDescriptor|FindDescriptor]] || Finds a specific descriptor in a list
+
|[[83Plus:Software:usb8x/Asm_Interface/GetIDs|GetIDs]] || Returns product and vender IDs for current device
 
|-
 
|-
−
|[[/FindPipe|FindPipe]] || Finds a pipe matching characteristics
+
|[[83Plus:Software:usb8x/Asm_Interface/HostInit|HostInit]] || Initialize a USB device
 
|-
 
|-
−
|[[/GetClass|GetClass]] || Returns the class and subclass for the current device
+
|[[83Plus:Software:usb8x/Asm_Interface/InternalInfo|InternalInfo]] || Returns current internal usb8x settings
 
|-
 
|-
−
|[[/GetIDs|GetIDs]] || Returns product and vender IDs for current device
+
|[[83Plus:Software:usb8x/Asm_Interface/LogCustom|LogCustom]] || Adds an entry to current log file
 
|-
 
|-
−
|[[/GetVersion|GetVersion]] || Returns the current driver version
+
|[[83Plus:Software:usb8x/Asm_Interface/PipeInfo|PipeInfo]] || Gets direction, type, and packet size for a pipe
 
|-
 
|-
−
|[[/HostInit|HostInit]] || Initialize a USB device
+
|[[83Plus:Software:usb8x/Asm_Interface/Pump|Pump]] || Should be called periodically when pump mode is on to poll USB port
 
|-
 
|-
−
|[[/HostKill|HostKill]] || Uninitialize a USB device
+
|[[83Plus:Software:usb8x/Asm_Interface/PumpOff|PumpOff]] || Turns off pump mode
 
|-
 
|-
−
|[[/IsDeviceConnected|IsDeviceConnected]] || Tests if a device is connected to the USB port
+
|[[83Plus:Software:usb8x/Asm_Interface/PumpOn|PumpOn]] || Turns on pump mode so that usb8x can be used with TIOS interrupt disabled
 
|-
 
|-
−
|[[/LogCustom|LogCustom]] || Adds an entry to current log file
+
|[[83Plus:Software:usb8x/Asm_Interface/ReadDescriptor|ReadDescriptor]] || Reads a descriptor from the device
 
|-
 
|-
−
|[[/PipeInfo|PipeInfo]] || Gets direction, type, and packet size for a pipe
+
|[[83Plus:Software:usb8x/Asm_Interface/ReqData|ReqData]] || Request data from an incoming pipe
 
|-
 
|-
−
|[[/ReadDescriptor|ReadDescriptor]] || Reads a descriptor from the device
+
|[[83Plus:Software:usb8x/Asm_Interface/SendControlData|SendControlData]] || Sends data to the control pipe
 
|-
 
|-
−
|[[/ReqData|ReqData]] || Request data from an incoming pipe
+
|[[83Plus:Software:usb8x/Asm_Interface/SendControlDataOut|SendControlDataOut]] || Sends data to the control pipe with an out data stage
 
|-
 
|-
−
|[[/SendControlData|SendControlData]] || Sends data to the control pipe
+
|[[83Plus:Software:usb8x/Asm_Interface/SendData|SendData]] || Send data to the device
 
|-
 
|-
−
|[[/SendData|SendData]] || Send data to the device
+
|[[83Plus:Software:usb8x/Asm_Interface/SetCallBack|SetCallBack]] || Sets the current callback routine
 
|-
 
|-
−
|[[/SetupInPipe|SetupInPipe]] || Sets up an incoming pipe
+
|[[83Plus:Software:usb8x/Asm_Interface/SetupInPipe|SetupInPipe]] || Sets up an incoming pipe
 
|-
 
|-
−
|[[/SetupLog|SetupLog]] || Starts logger
+
|[[83Plus:Software:usb8x/Asm_Interface/SetupLog|SetupLog]] || Starts logger
 
|-
 
|-
−
|[[/SetupOutPipe|SetupOutPipe]] || Sets up an outgoing pipe
+
|[[83Plus:Software:usb8x/Asm_Interface/SetupOutPipe|SetupOutPipe]] || Sets up an outgoing pipe
 
|-
 
|-
−
|[[/StopLog|StopLog]] || Stops logger
+
|[[83Plus:Software:usb8x/Asm_Interface/StopLog|StopLog]] || Stops logger
 
|-
 
|-
−
|[[/WaitTimerB|WaitTimerB]] || Precise delay
+
|[[83Plus:Software:usb8x/Asm_Interface/WaitTimerB|WaitTimerB]] || Precise delay
 
|}
 
|}

Latest revision as of 09:49, 17 January 2010

Many usb8x functions can be used by other programs/applications through usb8x's assembly language U_CALL interface. Macros are provded in usb8x.inc to simplify the process. The macros require a 32-byte RAM buffer defined as USBDriverCall. The U_CALL system must be initialized by the application as follows: 

U_CALL_INIT CallBackRoutine

Where CallBackRoutine is a subroutine that will be called when data arrives on the USB port. Some internal drivers override the user supplied callback address, but you must still provide one. If U_CALL_INIT returns carry, usb8x is not loaded on the calculator.


After the U_CALL system has been initialized with U_CALL_INIT, use the U_CALL macro to call usb8x entry points. The first entry point you should call is DriverInit as most other entry points require the driver be initialized before use. Be sure to call HostKill and DriverKill before quitting your program.

Internal Drivers

Several drivers are provided by usb8x to control specific devices. If you are interested in using usb8x in a game or program (as opposed to writing a driver for a new device), the pages below document the entry points you are most likely interested in.

Mass Storage Communicate with flash drives, hard drives, and other devices conforming to the USB MSD standard.
Mouse Communicate with mice and other pointing devices conforming to the USB HID mouse standard.
Keyboard Communicate with keyboards comforming to the USB HID keyboard standard.
SilverLink Use the TI-Graphlink SilverLink to communicate with another calculator.
GamePad Communicate with compatible gamepad controllers.
Vernier Communicate with EasyTemp or other Vernier devices.

High Level Entry Points

The following entry points may be useful for any program using usb8x, whether it be using an internal driver or low level entry points to create a new driver.

DriverInit Initialize the USB driver
DriverKill Uninitialize the USB driver
GetErrorCode Returns the current error and sub-error codes
GetVersion Returns the current driver version
HostKill Uninitialize a USB device
IsDeviceConnected Tests if a device is connected to the USB port
WaitTimerB Precise delay

Low Level Entry Points

These are the entry points you're most likely interested in using if you want to create a device driver for a new device.

AutoSetup Automatically sets up USB device
ConfigureDevice Chooses a device configuration
FindDescriptor Finds a specific descriptor in a list
FindPipe Finds a pipe matching characteristics
GetClass Returns the class and subclass for the current device
GetIDs Returns product and vender IDs for current device
HostInit Initialize a USB device
InternalInfo Returns current internal usb8x settings
LogCustom Adds an entry to current log file
PipeInfo Gets direction, type, and packet size for a pipe
Pump Should be called periodically when pump mode is on to poll USB port
PumpOff Turns off pump mode
PumpOn Turns on pump mode so that usb8x can be used with TIOS interrupt disabled
ReadDescriptor Reads a descriptor from the device
ReqData Request data from an incoming pipe
SendControlData Sends data to the control pipe
SendControlDataOut Sends data to the control pipe with an out data stage
SendData Send data to the device
SetCallBack Sets the current callback routine
SetupInPipe Sets up an incoming pipe
SetupLog Starts logger
SetupOutPipe Sets up an outgoing pipe
StopLog Stops logger
WaitTimerB Precise delay
Retrieved from "https://wikiti.brandonw.net/index.php?title=83Plus:Software:usb8x/Asm_Interface&oldid=9037"