Difference between revisions of "83Plus:BCALLs:8054"
From WikiTI
Nyquist562 (Talk | contribs) (Added comment about effect of call of reg. A) |
|||
| (One intermediate revision by one other user not shown) | |||
| Line 8: | Line 8: | ||
=== Inputs === | === Inputs === | ||
| − | * | + | * A = source page |
| + | * HL = source address | ||
* DE = destination address | * DE = destination address | ||
* BC = number of bytes to copy | * BC = number of bytes to copy | ||
=== Outputs === | === Outputs === | ||
| − | * | + | * HL advanced by BC bytes |
* DE advanced by BC bytes | * DE advanced by BC bytes | ||
* BC = 0 | * BC = 0 | ||
=== Destroys === | === Destroys === | ||
| + | * A | ||
* [[83Plus:RAM:8100|ramCode]] | * [[83Plus:RAM:8100|ramCode]] | ||
| Line 24: | Line 26: | ||
Note that the high bits of A are masked out appropriately (so, for instance, passing A = 7F will read from the boot page regardless of the hardware version.) Set A = 0 to copy data from the main RAM; you cannot use this routine to copy data from the extra RAM. | Note that the high bits of A are masked out appropriately (so, for instance, passing A = 7F will read from the boot page regardless of the hardware version.) Set A = 0 to copy data from the main RAM; you cannot use this routine to copy data from the extra RAM. | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
Latest revision as of 04:17, 17 September 2008
Synopsis
Unofficial Name: FlashToRAM2
BCALL Address: 8054
Copy data to RAM from either Flash or RAM.
Inputs
- A = source page
- HL = source address
- DE = destination address
- BC = number of bytes to copy
Outputs
- HL advanced by BC bytes
- DE advanced by BC bytes
- BC = 0
Destroys
- A
- ramCode
Comments
This is almost exactly equivalent to the OS FlashToRAM.
Note that the high bits of A are masked out appropriately (so, for instance, passing A = 7F will read from the boot page regardless of the hardware version.) Set A = 0 to copy data from the main RAM; you cannot use this routine to copy data from the extra RAM.
