84PCE:Ports:0028: Difference between revisions

From WikiTI
Jump to navigationJump to search
Jacobly (talk | contribs)
No edit summary
Jacobly (talk | contribs)
No edit summary
Line 20: Line 20:
=== Bit [3] ===
=== Bit [3] ===
Can be cleared by writing a 0.
Can be cleared by writing a 0.
Gets cleared any time unprivileged code is executed.
Gets cleared any time unprivileged code is executed or port 6 bit 2 is reset.
Fetching a flash unlock sequence (F31800F3F3ED7EED56ED3928ED3828CB57) that ends in privileged flash is the only way to set it.
Fetching a flash unlock sequence (F31800F3F3ED7EED56ED3928ED3828CB57) that ends in privileged flash while port 6 bit 2 is set is the only way to set it.


=== Bits [7:4] ===
=== Bits [7:4] ===
Writes do not latch, no apparent effect.
Writes do not latch, no apparent effect.

Revision as of 19:42, 8 August 2017

Synopsis

Port Number: 0028

Function: Flash Protection Status

Details

Flash is unlocked if both bits 2 and 3 of this port are set.

Bit [0]

Latches value written, no apparent effect.

Bit [1]

Always 0, writes do not latch.

Bit [2]

Can be written freely (under the usual protected port constraints).

Bit [3]

Can be cleared by writing a 0. Gets cleared any time unprivileged code is executed or port 6 bit 2 is reset. Fetching a flash unlock sequence (F31800F3F3ED7EED56ED3928ED3828CB57) that ends in privileged flash while port 6 bit 2 is set is the only way to set it.

Bits [7:4]

Writes do not latch, no apparent effect.