Difference between revisions of "83Plus:BCALLs:50B3"
From WikiTI
84plusfreak (Talk | contribs) m |
84plusfreak (Talk | contribs) m |
||
| Line 20: | Line 20: | ||
This is not just checking bit 0 of port 2. | This is not just checking bit 0 of port 2. | ||
It puts the calculator into a special mode, creates a delay, polls bit 0 of port 2, and puts the calculator back to normal. | It puts the calculator into a special mode, creates a delay, polls bit 0 of port 2, and puts the calculator back to normal. | ||
| + | BCALLind 50B6 is slightly different from 50B3 because a small delay is done before the routine. | ||
== Example == | == Example == | ||
Revision as of 01:55, 13 May 2005
Synopsis
Official Name: Chk_Batt_Low
BCALL Address: 50B3,50B6
Check the batteries.
Inputs
- None
Outputs
- Z=1: Batteries are low
- Z=0: Batteries are good
Registers Destroyed
- All
Comments
This is not just checking bit 0 of port 2. It puts the calculator into a special mode, creates a delay, polls bit 0 of port 2, and puts the calculator back to normal. BCALLind 50B6 is slightly different from 50B3 because a small delay is done before the routine.
Example
B_CALL Chk_Batt_Low ret z B_CALL ChkFindSym ret c ld a,b or a ret nz AppOnErr errHand B_CALL Arc_Unarc AppOffErr errHand: ret
