Difference between revisions of "83Plus:Ports:01"
From WikiTI
		
		
		
| Line 1: | Line 1: | ||
| − | + | == Synopsis ==  | |
| − | + | '''Port Number:''' 01h  | |
| − | + | '''Function:''' Keyboard Port  | |
| + | |||
| + | This port controls the on-calc keypad. The keypad is divided into a series of groups.  | ||
| + | |||
| + | === Read Values ===  | ||
| + | * Bits are set according whether corresponding keys from selected groups are pressed. Groups are selected through writing to the port. A pressed key reads a 0 bit. An unpressed key reads a 1 bit. The port reads FF after a reset (write FF).  | ||
| + | |||
| + | === Write Values ===  | ||
| + | * $FF : Reset the keypad. This unselects all groups and resets the keypad state.  | ||
| + | * Anything else : Any 0 bit adds the corresponding group to the list of monitored groups. When a key in a monitored group is pressed, the corresponding key bit reads 1.  | ||
| + | |||
| + | == Comments ==  | ||
| + | The key map is laid out as follows:  | ||
| + | |||
| + |  <nowiki>     Group Bit ->     0     1     2     3     4     5     6     7  | ||
| + |               Group Mask ->   FE    FD    FB    F7    EF    DF    BF    7F  | ||
| + | Key Bit (Mask)  | ||
| + | 0 (FE)                    | DOWN|ENTER| (-) |  .  |  0  |     |GRAPH|     |  | ||
| + | 1 (FD)                    | LEFT|  +  |  3  |  2  |  1  | STO |TRACE|     |  | ||
| + | 2 (FB)                    |RIGHT|  -  |  6  |  5  |  4  | LN  |ZOOM |     |  | ||
| + | 3 (F7)                    | UP  |  *  |  9  |  8  |  7  | LOG |WIND |     |  | ||
| + | 4 (EF)                    |     |  /  |  )  |  (  |  ,  | x^2 | Y=  |     |  | ||
| + | 5 (DF)                    |     |  ^  | TAN | COS | SIN |x^-1 | 2nd |     |  | ||
| + | 6 (BF)                    |     |CLEAR|VARS |PRGM |APPS |MATH |MODE |     |  | ||
| + | 7 (7F)                    |     |     |     |STAT |X,T..|ALPHA| DEL |     |  | ||
| + | |||
| + | NOTE: Group FB Key FE is NEGATE, not to be confused SUBTRACT.  | ||
| + | NOTE: Group DF Key FE could be ON, but the ON key is tested elsewhere (a "special case" key - after all, it is the ON key).  | ||
| + | |||
| + | == Example ==  | ||
| + |  <nowiki>ld a, 0FFh ;Reset the keypad.  | ||
| + | out (1), a  | ||
| + | ld a, 0FEh ;Select group 0.  | ||
| + | out (1), a  | ||
| + | in a, (1) ;Test for keys.  | ||
| + | and 0FDh ;Test for Left Arrow key. Basically set all other bits to 0. This means A becomes 0 if left was pressed.  | ||
| + | call z, LeftArrowPressed ;If A==0 then Left Arrow bit was reset, meaning it was pressed.  | ||
| + | ld a, 0FFh ;Reset the keypad.  | ||
| + | out (1), a</nowiki>  | ||
| + | |||
| + | == Credits and Contributions ==  | ||
| + | * '''/dev/console:''' For letting me type all this.  | ||
Revision as of 20:52, 26 March 2005
Synopsis
Port Number: 01h
Function: Keyboard Port
This port controls the on-calc keypad. The keypad is divided into a series of groups.
Read Values
- Bits are set according whether corresponding keys from selected groups are pressed. Groups are selected through writing to the port. A pressed key reads a 0 bit. An unpressed key reads a 1 bit. The port reads FF after a reset (write FF).
 
Write Values
- $FF : Reset the keypad. This unselects all groups and resets the keypad state.
 - Anything else : Any 0 bit adds the corresponding group to the list of monitored groups. When a key in a monitored group is pressed, the corresponding key bit reads 1.
 
Comments
The key map is laid out as follows:
     Group Bit ->     0     1     2     3     4     5     6     7
              Group Mask ->   FE    FD    FB    F7    EF    DF    BF    7F
Key Bit (Mask)
0 (FE)                    | DOWN|ENTER| (-) |  .  |  0  |     |GRAPH|     |
1 (FD)                    | LEFT|  +  |  3  |  2  |  1  | STO |TRACE|     |
2 (FB)                    |RIGHT|  -  |  6  |  5  |  4  | LN  |ZOOM |     |
3 (F7)                    | UP  |  *  |  9  |  8  |  7  | LOG |WIND |     |
4 (EF)                    |     |  /  |  )  |  (  |  ,  | x^2 | Y=  |     |
5 (DF)                    |     |  ^  | TAN | COS | SIN |x^-1 | 2nd |     |
6 (BF)                    |     |CLEAR|VARS |PRGM |APPS |MATH |MODE |     |
7 (7F)                    |     |     |     |STAT |X,T..|ALPHA| DEL |     |
NOTE: Group FB Key FE is NEGATE, not to be confused SUBTRACT.
NOTE: Group DF Key FE could be ON, but the ON key is tested elsewhere (a "special case" key - after all, it is the ON key).
== Example ==
 <nowiki>ld a, 0FFh ;Reset the keypad.
out (1), a
ld a, 0FEh ;Select group 0.
out (1), a
in a, (1) ;Test for keys.
and 0FDh ;Test for Left Arrow key. Basically set all other bits to 0. This means A becomes 0 if left was pressed.
call z, LeftArrowPressed ;If A==0 then Left Arrow bit was reset, meaning it was pressed.
ld a, 0FFh ;Reset the keypad.
out (1), a
Credits and Contributions
- /dev/console: For letting me type all this.