Difference between revisions of "83Plus:Software:usb8x/Asm Interface/Silver"

From WikiTI
Jump to: navigation, search
 
m (oops)
Line 1: Line 1:
 
The SilverLink driver proves support for the TI-Graphlink SilverLink cable.  This cable can be used to communicate with another calculator and to create, for example, a daisy-chain network of TI-84 Plus calculators.
 
The SilverLink driver proves support for the TI-Graphlink SilverLink cable.  This cable can be used to communicate with another calculator and to create, for example, a daisy-chain network of TI-84 Plus calculators.
  
The SilverLink driver is initialized via [[/SilverInit|SilverInit]].  This entry point initializes both the driver and the keyboard hardware, so you may want to check to see if a device is connected via [[../IsDeviceConnected|IsDeviceConnected]] first.
+
The SilverLink driver is initialized via [[/SilverInit|SilverInit]].  This entry point initializes both the driver and the silverlink hardware, so you may want to check to see if a device is connected via [[../IsDeviceConnected|IsDeviceConnected]] first.
  
 
After initializing the keyboard, use [[/SilverSend|SilverSend]] to send data to the connected device.  Incoming data will be reported to the callback function specified during U_CALL_INIT.
 
After initializing the keyboard, use [[/SilverSend|SilverSend]] to send data to the connected device.  Incoming data will be reported to the callback function specified during U_CALL_INIT.

Revision as of 19:11, 27 August 2006

The SilverLink driver proves support for the TI-Graphlink SilverLink cable. This cable can be used to communicate with another calculator and to create, for example, a daisy-chain network of TI-84 Plus calculators.

The SilverLink driver is initialized via SilverInit. This entry point initializes both the driver and the silverlink hardware, so you may want to check to see if a device is connected via [[../IsDeviceConnected|IsDeviceConnected]] first.

After initializing the keyboard, use SilverSend to send data to the connected device. Incoming data will be reported to the callback function specified during U_CALL_INIT.

Entry Points

SilverInit Initialize the SilverLink driver and hardware
SilverSend Send data via the SilverLink to the attached device