Difference between revisions of "83Plus:Software:usb8x/Supported Devices"
From WikiTI
Commando125 (Talk | contribs) |
Commando125 (Talk | contribs) |
||
| Line 5: | Line 5: | ||
* HID Keyboard | * HID Keyboard | ||
* HID Mouse: Tested with: | * HID Mouse: Tested with: | ||
| − | ** Microsoft PS/2 Mouse (Laser) | + | ** Microsoft PS/2 Mouse (USB/Laser/3-Button/Has red thing on the bottom-middle of the mouse that lights up when moved/Outputs 100mA) |
* Mass Storage Device. Tested with: | * Mass Storage Device. Tested with: | ||
** Sandisk Cruzer | ** Sandisk Cruzer | ||
Revision as of 23:25, 3 January 2007
Most USB devices that are self-powered, or draw 100mA or less current from the USB bus should be compatible with usb8x. Below is a list of device classes and specific devices that have been tested. Devices that require isochronous endpoints or have an integrated USB hub are not currently compatible.
Contents
Internal Driver
These devices work and usb8x contains an internal driver to control them.
- HID Keyboard
- HID Mouse: Tested with:
- Microsoft PS/2 Mouse (USB/Laser/3-Button/Has red thing on the bottom-middle of the mouse that lights up when moved/Outputs 100mA)
- Mass Storage Device. Tested with:
- Sandisk Cruzer
- Lexar JumpDrive/Secure
- SMI Corp USB Disk
- 512 Mini Disk Genie
- PQI Intelligent Stick
- Dazzle Zio All in 1 Reader (required external power supply).
- TI Silverlink
- Some gamepad controllers. Tested with:
- Logitech Precision Gamepad
- Logitech Dual Action Gamepad (only the buttons, the D-pad and joysticks don't work)
- RetroZone NES pad
- Skillz Gamecube to USB (The company no longer seems to exist.)
- Recoil USB 4-Axis 12-Button Gamepad (1/2 the buttons work on the demo)
- Vernier EasyTemp
External Driver
These devices work and an external driver exists to control them.
- None
Works, No Complete Driver
These devices have been tested to work with usb8x, but no complete driver currently exists.
- EMS HID Playstation 2 controller adapter
- HID Mouse/Keyboard Combo (I (84plusfreak) am writing a driver for it.)
Should Work
These devices have been tested to properly initialize with usb8x, but no drivers have been attempted.
- Canon i850 printer
- Canon SD400 digital camera
- Motorola SURFboard cable modem
- Motorola V220 (can act as USB Modem)
- TI-84 Plus (calc<->calc)
- Generic IrDA USB dongle (says it draws 440 mA, but it initializes fine anyway)
Not Compatible
These devices are not compatible with usb8x.
- Ezonics webcam - isochronous endpoints
- Netgear WG111 802.11 adapter - draws too much current?
- SMC 802.11b adapter - draws too much current
- Taurus MBT-1203 bluetooth adapter - has integrated hub
