Difference between revisions of "83Plus:Software:usb8x/Supported Devices"

From WikiTI
Jump to: navigation, search
m (PNY Attache 1GB not working, minor changes)
(Internal Driver)
Line 3: Line 3:
 
== Internal Driver ==
 
== Internal Driver ==
 
These devices work and usb8x contains an internal driver to control them.
 
These devices work and usb8x contains an internal driver to control them.
* HID Keyboard
+
* HID Keyboard. Tested with:
 +
** IBM RapidAccessII with provided USB adapter
 
* HID Mouse.  Tested with:
 
* HID Mouse.  Tested with:
 
** Microsoft USB Optical Mouse
 
** Microsoft USB Optical Mouse
 +
** General Electric Mini Laptop Mouse
 
* Mass Storage Device.  Tested with:
 
* Mass Storage Device.  Tested with:
 +
** Memorex TravelDrive
 
** Sandisk Cruzer
 
** Sandisk Cruzer
 
** Lexar JumpDrive/Secure
 
** Lexar JumpDrive/Secure

Revision as of 12:08, 19 July 2007

Most USB devices that are self-powered, or draw 100mA or less current from the USB bus should be compatible with usb8x. Below is a list of device classes and specific devices that have been tested. Devices that require isochronous endpoints or have an integrated USB hub are not currently compatible.

Internal Driver

These devices work and usb8x contains an internal driver to control them.

  • HID Keyboard. Tested with:
    • IBM RapidAccessII with provided USB adapter
  • HID Mouse. Tested with:
    • Microsoft USB Optical Mouse
    • General Electric Mini Laptop Mouse
  • Mass Storage Device. Tested with:
    • Memorex TravelDrive
    • Sandisk Cruzer
    • Lexar JumpDrive/Secure
    • SMI Corp USB Disk
    • 512 Mini Disk Genie
    • PQI Intelligent Stick
    • Dazzle Zio All in 1 Reader (required external power supply)
  • TI Silverlink
  • Some gamepad controllers. Tested with:
    • Logitech Precision Gamepad
    • Logitech Dual Action Gamepad (only the buttons, the D-pad and joysticks don't work)
    • RetroZone NES pad
    • Skillz Gamecube to USB (The company no longer seems to exist.)
    • Recoil USB 4-Axis 12-Button Gamepad (half of the buttons work on the demo)
  • Vernier EasyTemp

External Driver

These devices work and an external driver exists to control them.

  • None

Works, No Complete Driver

These devices have been tested to work with usb8x, but no complete driver currently exists.

  • EMS HID Playstation 2 controller adapter
  • HID Mouse/Keyboard Combo (I (84plusfreak) am writing a driver for it.)

Should Work

These devices have been tested to properly initialize with usb8x, but no drivers have been attempted.

  • Canon i850 printer
  • Canon SD400 digital camera
  • Motorola SURFboard cable modem
  • Motorola V220 (can act as USB Modem)
  • TI-84 Plus (calc<->calc)
  • Generic IrDA USB dongle (says it draws 440 mA, but initializes fine anyway (because it only draws up to 100mA until configured))

Not Compatible

These devices are not compatible with usb8x.

  • Ezonics webcam - isochronous endpoints
  • Netgear WG111 802.11 adapter - draws too much current?
  • SMC 802.11b adapter - draws too much current
  • Taurus MBT-1203 bluetooth adapter - has integrated hub
  • PNY Attache 1GB USB flash drive - NAKs on all but "request sense" and inquiry commands