Difference between revisions of "84PCE:Ports:001D"
From WikiTI
| Line 5: | Line 5: | ||
'''Function:''' Stores the highest address of privileged executable code | '''Function:''' Stores the highest address of privileged executable code | ||
| − | These ports | + | These ports contain the address of the first byte of unprivileged code (LSB in 1D, MSB in 1F). |
| + | All code before this address is treated as privileged, and all code at and after this address is treated as unprivileged. | ||
| + | The boot code sets this to the end of the boot code (020000), after which the OS sets it to the end of the OS (0AXXXX, varies by OS version). | ||
| + | Privileged code is allowed to execute port commands (in and out) and read/write to the [[84PCE:Ports:0020|protected memory region]]. | ||
| + | Unprivileged code always input/read a 0 and get an nmi on output/write. | ||
| + | |||
| + | '''Note:''' when determining whether or not an instruction is privileged, the address ''after'' the instruction is used. | ||
Revision as of 20:50, 26 August 2016
Synopsis
Port Number: 001D-001F
Function: Stores the highest address of privileged executable code
These ports contain the address of the first byte of unprivileged code (LSB in 1D, MSB in 1F). All code before this address is treated as privileged, and all code at and after this address is treated as unprivileged. The boot code sets this to the end of the boot code (020000), after which the OS sets it to the end of the OS (0AXXXX, varies by OS version). Privileged code is allowed to execute port commands (in and out) and read/write to the protected memory region. Unprivileged code always input/read a 0 and get an nmi on output/write.
Note: when determining whether or not an instruction is privileged, the address after the instruction is used.
