83Plus:Ports:49: Difference between revisions
From WikiTI
Jump to navigationJump to search
Created page with "49 - USB transceiver USB transceiver {{84P-Only Port|01}} == Synopsis == '''Port Number:''' 49 '''Funct..." |
m Clarify |
||
| Line 10: | Line 10: | ||
=== Read Values === | === Read Values === | ||
* Bit 0: Means something | * Bit 0: Means something | ||
* Bit 1: USB+ line | * Bit 1: USB data+ line | ||
* Bit 2: USB- line | * Bit 2: USB data- line | ||
* Bit 3: Means something | * Bit 3: Means something | ||
* Bit 4: Possible something to do with low/full speed status | * Bit 4: Possible something to do with low/full speed status | ||
Latest revision as of 00:35, 4 March 2020
| This port only exists on the the TI-84 Plus and the TI-84 Plus Silver Edition. On the standard TI-83 Plus, it acts as a shadow of port 01. On the TI-83 Plus Silver Edition, this port has no effect. |
Synopsis
Port Number: 49
Function: USB transceiver status
This provides the raw status of signals from the USB transceiver. Probably not too useful.
Read Values
- Bit 0: Means something
- Bit 1: USB data+ line
- Bit 2: USB data- line
- Bit 3: Means something
- Bit 4: Possible something to do with low/full speed status
- Bits 5-7: No function
Write Values
This port is read-only.