83Plus:Ports:02: Difference between revisions

From WikiTI
Jump to navigationJump to search
mNo edit summary
→Example: pluralized; sectionized; HW check bug + 1cc optimization
Line 19: Line 19:
See [[83Plus:Ports:21|Port 21h]] for how to distinguish the 84+ Basic from the 84+ SE.
See [[83Plus:Ports:21|Port 21h]] for how to distinguish the 84+ Basic from the 84+ SE.


== Example ==
== Examples ==
'''Battery checking'''
=== Battery checking ===
  <nowiki> push af
  <nowiki> push af
  in a, (2)
  in a, (2)
Line 28: Line 28:
  pop af</nowiki>
  pop af</nowiki>


'''LCD Testing'''
=== LCD Testing ===
  <nowiki> push af
  <nowiki> push af
WaitLoop:
WaitLoop:
Line 38: Line 38:
  pop af</nowiki>
  pop af</nowiki>


'''Device checking'''
=== Device checking ===


''This example also uses [[83Plus:Ports:21|Port 21h]].''
''This example also uses [[83Plus:Ports:21|Port 21h]].''
  <nowiki> in a, (2)
  <nowiki> in a, (2)
  rlca ;Roll bit 7 into carry.
  rlca ;Roll bit 7 into carry.
  jp c, Regular83Plus
  jp nc, Regular83Plus
  rlca
  and 40h ;Test bit 5, now rotated into bit 6.
rlca ;Roll bit 5 into carry.
  jp z, Silver83Plus
  jp nc, Silver83Plus
  in a, (21h)
  in a, (21h)
  and 01h
  and 03h
  jp z, Regular84Plus
  jp z, Regular84Plus
  jp nz, Silver84Plus</nowiki>
  jp nz, Silver84Plus</nowiki>


== Credits and Contributions ==
== Credits and Contributions ==
* '''Michael Vincent''': Documentation of port 2 located [http://www.michaelv.org/programs/calcs/ports/port2.html here].
* '''Michael Vincent''': Documentation of port 2 located [http://www.michaelv.org/programs/calcs/ports/port2.html here].

Revision as of 00:12, 13 May 2005

Synopsis

Port Number: 02h

Function: Calculator Status Information

This port reports various status information, including battery strength, LCD driver status, and calculator type.

Read Values

  • Bit 0: Set if the batteries are good. Reset if the batteries are low. The calculator will refuse to Garbage Collect or receive a FLASH App or OS when the batteries are low.
  • Bit 1: Set if the LCD Driver can receive a command. Reset otherwise. This is basically the inverse of bit 7 from Port 10h.
  • Bit 5: Set for TI-84+ and TI-84+ SE calculators. Reset for TI-83+ and TI-83+ SE calculators.
  • Bit 7: Reset for a TI-83+ Basic. Set for everything else.

Write Values

  • No useful effect.

Comments

See Port 21h for how to distinguish the 84+ Basic from the 84+ SE.

Examples

Battery checking

 push af
 in a, (2)
 and 01h
 call nz, BatteriesGood
 call z, BatteriesLow
 pop af

LCD Testing

 push af
WaitLoop:
 in a, (2)
 and 02h
 jr z, WaitLoop
 ;Send a command, like 03 (LCD "On").
 call LCDIsReady
 pop af

Device checking

This example also uses Port 21h.

 in a, (2)
 rlca ;Roll bit 7 into carry.
 jp nc, Regular83Plus
 and 40h ;Test bit 5, now rotated into bit 6.
 jp z, Silver83Plus
 in a, (21h)
 and 03h
 jp z, Regular84Plus
 jp nz, Silver84Plus

Credits and Contributions

  • Michael Vincent: Documentation of port 2 located here.