Difference between revisions of "83Plus:Software:usb8x/Asm Interface/MSD"
m (Clarification) |
(msdDetect entry point added) |
||
| Line 36: | Line 36: | ||
|- | |- | ||
| [[/UFI_Write|UFI_Write]] || Writes memory in sector buffer to (MSDLBA) address | | [[/UFI_Write|UFI_Write]] || Writes memory in sector buffer to (MSDLBA) address | ||
| + | |- | ||
| + | | [[/msdDetect|msdDetect]] || Detects and loads 83P/8XP levels based on detection string and specified directory | ||
|- | |- | ||
| [[/FAT_Initialize|FAT_Initialize]] || Initializes connected mass storage device for FAT16 file system operations | | [[/FAT_Initialize|FAT_Initialize]] || Initializes connected mass storage device for FAT16 file system operations | ||
Revision as of 06:58, 19 November 2006
The mass storage driver works through a series of U_CALL entry points, much like the HID driver.
It requires two RAM buffers, one for internal use and one for a sector buffer. File handles used for opened files (explained later) also require around 27 bytes. The size of all three of these buffers can be obtained through the MSDVersion U_CALL. The size of the internal buffer is typically 254 bytes and the sector buffer is 512 bytes.
The entry point which requires these buffers is the MSD_Initialize U_CALL. Its memory can be dynamically allocated to appBackUpScreen (taking up practically all of it) with the code below:
U_CALL MSDVersion ld de,appBackUpScreen push de add hl,de ex de,hl pop hl U_CALL MSD_Initialize
For file system operations, you will then make calls to UFI_Initialize and FAT_Initialize. All entry points will return with the carry flag set if there are problems, with more detailed information available via [[../GetErrorCode|GetErrorCode]].
No knowledge of the intimate details of FAT16 are required. However, the "starting cluster" of a directory is used in several routines. This is a 16-bit number uniquely indentifying a directory. It is beneficial to use this number rather than an extremely long ASCIIZ directory path which wastes memory. It is easily obtained with FAT_getStartingCluster by passing an ASCIIZ directory path to it.
Entry Points
If all three of the initializing U_CALLs succeed, the other following entry points can then be called.
| MSDVersion | Gets mass storage driver version and memory requirements |
| MSD_Initialize | Initializes mass storage driver |
| UFI_Initialize | Initializes connected mass storage device for sector read/write operations |
| UFI_getCapacity | Gets capacity of entire drive and sets up bytes-per-sector |
| UFI_Read | Reads sector at (MSDLBA) address into sector buffer |
| UFI_Write | Writes memory in sector buffer to (MSDLBA) address |
| msdDetect | Detects and loads 83P/8XP levels based on detection string and specified directory |
| FAT_Initialize | Initializes connected mass storage device for FAT16 file system operations |
| DOS_openFile | Opens a file and populates file handle with important information |
| DOS_fileSeek | Sets seek pointer for file handle to specified offset |
| DOS_fileRead | Read bytes from a file |
| DOS_fileWrite | Write bytes to a file and grows it if necessary |
| DOS_updateAttributes | Update "last modified" date/time and other attributes |
| DOS_createFile | Create new file in specified directory with size 0 |
| DOS_createDirectory | Create new subdirectory in specified directory |
| DOS_renameFileEntry | Rename specified file or folder |
| DOS_deleteFileEntry | Delete file or folder (including contents) |
| DOS_countFilesInDir | Get number of files/folders in specified directory |
| DOS_getNextFile | Get first/next file in specified directory |
| DOS_getFileSize | Get size of file |
| DOS_getDirEntry | Get directory entry for specified file/folder |
| FAT_nameConvertTo11 | Convert name to 11-character format (ex. "README TXT")
|
| FAT_nameConvertFrom11 | Convert name to ASCIIZ format (ex. "readme.txt") |
| FAT_lookupPath | Find whether specified file/directory exists |
| FAT_findFileInCluster | Get directory entry for a file in specified folder |
| FAT_getStartingCluster | Get starting cluster of specified directory |
| MSD_ImportVariable | Imports 8x* file in specified directory as calculator variable in RAM/Flash |
| MSD_ExportVariable | Exports calculator variable in RAM/Flash as 8x* file in specified directory |
Other File Systems
You can use the MSD_Initialize, UFI_getCapacity, UFI_Read, and UFI_Write entry points to create your own file system driver. For example, you could create a driver for ext2/3, FAT32, or any other file system imaginable.
The low-level parts of the mass storage driver work by reading and writing sectors to the drive based on the current LBA address. This is located in (MSDLBA) in the mass storage driver's memory. To create your own file system driver, you will need to implement all of the details specific to that file system.
The MSD_Initialize entry point is required for any communication with the drive. When this entry point succeeds, you would then call UFI_getCapacity to set up (MSDBPS) in the driver memory. This is necessary for the UFI_Read and UFI_Write entry points to succeed.
Once both entry points succeed, you are free to read and write as much as you like. The boot sector is located at LBA address 0x00000000. Most file systems require that you read this first to find out what to do next. Check out the mass storage driver in the usb8x source for more information.
