Difference between revisions of "83Plus:BCALLs:8054"
From WikiTI
(→Comments: page number masking) |
Nyquist562 (Talk | contribs) (Added comment about effect of call of reg. A) |
||
| Line 24: | Line 24: | ||
Note that the high bits of A are masked out appropriately (so, for instance, passing A = 7F will read from the boot page regardless of the hardware version.) Set A = 0 to copy data from the main RAM; you cannot use this routine to copy data from the extra RAM. | Note that the high bits of A are masked out appropriately (so, for instance, passing A = 7F will read from the boot page regardless of the hardware version.) Set A = 0 to copy data from the main RAM; you cannot use this routine to copy data from the extra RAM. | ||
| + | |||
| + | |||
| + | |||
| + | In experimenting with this BCall, I have discovered that the register A is often disrupted after this call returns | ||
| + | ---Nyquist562--- | ||
Revision as of 16:52, 9 May 2007
Synopsis
Unofficial Name: FlashToRAM2
BCALL Address: 8054
Copy data to RAM from either Flash or RAM.
Inputs
- AHL = source address
- DE = destination address
- BC = number of bytes to copy
Outputs
- AHL advanced by BC bytes
- DE advanced by BC bytes
- BC = 0
Destroys
Comments
This is almost exactly equivalent to the OS FlashToRAM.
Note that the high bits of A are masked out appropriately (so, for instance, passing A = 7F will read from the boot page regardless of the hardware version.) Set A = 0 to copy data from the main RAM; you cannot use this routine to copy data from the extra RAM.
In experimenting with this BCall, I have discovered that the register A is often disrupted after this call returns ---Nyquist562---
