83Plus:Ports:88: Difference between revisions

From WikiTI
Jump to navigationJump to search
Created page with '88 - USB Output-Enabled Pipes (continued) USB Output-Enabled Pipes (continued) == Synopsis == '''Port Numbe…'
 
mNo edit summary
Line 5: Line 5:
'''Function:''' USB Output-Enabled Pipes
'''Function:''' USB Output-Enabled Pipes


This port is a bitmap of which pipes in the A8h-AFh range are enabled for output. Similar to [[83Plus:Ports:84|port 87]]
This port is a bitmap of which pipes in the A8h-AFh range are enabled for output. Similar to [[83Plus:Ports:87|port 87]]


{{84P-Only Port|08}}
{{84P-Only Port|08}}

Revision as of 04:02, 9 December 2010

Synopsis

Port Number: 88h

Function: USB Output-Enabled Pipes

This port is a bitmap of which pipes in the A8h-AFh range are enabled for output. Similar to port 87

This port only exists on the the TI-84 Plus and the TI-84 Plus Silver Edition. On the standard TI-83 Plus, it acts as a shadow of port 08. On the TI-83 Plus Silver Edition, this port has no effect.

Read Values

  • Bit 0: Hypothetically, set if pipe 8 is enabled for output.
  • Bit 1: Hypothetically, set if pipe 9 is enabled for output.
  • Bit 2: Hypothetically, set if pipe A is enabled for output.
  • Bit 3: Hypothetically, set if pipe B is enabled for output.
  • Bit 4: Hypothetically, set if pipe C is enabled for output.
  • Bit 5: Hypothetically, set if pipe D is enabled for output.
  • Bit 6: Hypothetically, set if pipe E is enabled for output.
  • Bit 7: Hypothetically, set if pipe F is enabled for output.

Write Values

  • No effect


Comments

I'm not sure anything on this page has actually been tested, but it should be true.