83Plus:Ports:4A: Difference between revisions

From WikiTI
Jump to navigationJump to search
No edit summary
No edit summary
Line 1: Line 1:
[[Category:83Plus:Ports:By Address|4A - D+ Control]] [[Category:83Plus:Ports:By Name|D+ Control]]
[[Category:83Plus:Ports:By Address|4A - USB Line Control]] [[Category:83Plus:Ports:By Name|USB Line Control]]
{{84P-Only Port|0A}}
{{84P-Only Port|0A}}
== Synopsis ==
== Synopsis ==
'''Port Number:''' 4A
'''Port Number:''' 4A


'''Function:''' D+ Control
'''Function:''' USB Line Control


Using this port, you can control the D+ USB line. The USB controller doesn't even have to be powered.
Using this port, you can control the D+ from an A-type connector and the D− line from a B-type connector.


=== Read Values ===
=== Read Values ===
Line 12: Line 12:
* Bit 1: Set if not connected to computer. Flashes when talking to computer.
* Bit 1: Set if not connected to computer. Flashes when talking to computer.
* Bit 2: Set if not connected to computer.
* Bit 2: Set if not connected to computer.
* Bit 3: If set, D+ is forced high. Max 0.79 mA.
* Bit 3: If set, the corresponding line is forced high. Max 0.79 mA.
* Bit 4: Only significant if bit 3 is set. If this is set, D+ gets extra power. Max total 1.52 mA.
* Bit 4: Only significant if bit 3 is set. If this is set, the corresponding line gets extra power. Max total 1.52 mA.
* Bit 5: Reset means D− is getting 0.05 V at 15μA.
* Bit 5: Reset means the corresponding line is getting 0.05 V at 15μA.
* Bit 6: Always 0
* Bit 6: Always 0
* Bit 7: Always 0
* Bit 7: Always 0
Line 20: Line 20:
=== Write Values ===
=== Write Values ===
* Bits 0-2: No effect
* Bits 0-2: No effect
* Bit 3: Set to force D+ high. Max output: 0.79 mA.
* Bit 3: Set to force the corresponding line. Max output: 0.79 mA.
* Bit 4: If bit 3 is set. Setting this give D+ extra power. Max total output 1.52 mA.
* Bit 4: If bit 3 is set. Setting this give the corresponding line extra power. Max total output 1.52 mA.
* Bit 5: Resetting this gives D− 0.05 V at 15μA.
* Bit 5: Resetting this gives the corresponding line 0.05 V at 15μA.
* Bits 6-7: No effect
* Bits 6-7: No effect


== Comments ==
== Comments ==
If you don't like USB protocol, you could try to use this port for communication, or for sound. Anyways, when you are done, output 20h.
If you don't like USB protocol, you could try to use this port for communication, or maybe as a "ready" signal. Anyways, when you are done, output 20h.

Revision as of 23:00, 3 June 2011

This port only exists on the the TI-84 Plus and the TI-84 Plus Silver Edition. On the standard TI-83 Plus, it acts as a shadow of port 0A. On the TI-83 Plus Silver Edition, this port has no effect.

Synopsis

Port Number: 4A

Function: USB Line Control

Using this port, you can control the D+ from an A-type connector and the D− line from a B-type connector.

Read Values

  • Bit 0: Set if connected to computer.
  • Bit 1: Set if not connected to computer. Flashes when talking to computer.
  • Bit 2: Set if not connected to computer.
  • Bit 3: If set, the corresponding line is forced high. Max 0.79 mA.
  • Bit 4: Only significant if bit 3 is set. If this is set, the corresponding line gets extra power. Max total 1.52 mA.
  • Bit 5: Reset means the corresponding line is getting 0.05 V at 15μA.
  • Bit 6: Always 0
  • Bit 7: Always 0

Write Values

  • Bits 0-2: No effect
  • Bit 3: Set to force the corresponding line. Max output: 0.79 mA.
  • Bit 4: If bit 3 is set. Setting this give the corresponding line extra power. Max total output 1.52 mA.
  • Bit 5: Resetting this gives the corresponding line 0.05 V at 15μA.
  • Bits 6-7: No effect

Comments

If you don't like USB protocol, you could try to use this port for communication, or maybe as a "ready" signal. Anyways, when you are done, output 20h.