84PCE:Ports:0000 Unknowns
From WikiTI
Revision as of 02:57, 6 August 2017 by MateoConLechuga (Talk | contribs)
If a port is not listed; it indicates that writes have no effect and do not latch, and that reads are 0. Note that this may not be true one hundred percent.
0000 Range
| Port | Default | Bits | Information |
| 0000 | 03 | CPU Speed Control | |
| 0001 | 03 | OS Timer Control | |
| 0002 | Read only, value can change | ||
| 0005 | 76 | Set bit 5 to freeze, bit 6 affects backlight | |
| 0006 | 03 | Display refresh | |
| 0007 | B7 | Latches values written | |
| 0008 | 7F | Cannot change value | |
| 0009 | 37 | Power control system | |
| 000A | FD | Latches value written | |
| 000C | 00 | Latches value written | |
| 000D | FF | Bit 0: Freeze if reset Bit 1: Crash if reset Bit 2: No apparent effect if reset Bit 3: Reset to disable VRAM? Upon set, VRAM is garbage. Bits [7:4]Possibly last value written | |
| 000E | 0A | Latches value written | |
| 000F | 42 | High nibble may be a status, low 2 bits latch value written | |
| 001C | 80 | Cannot change value | |
| 0028 | Bit 1 is always 0, other bits latch value written | ||
| 0029 | 00 | Bit 0 latches value written | |
| 002A | 70 | Latches value written | |
| 002B | FE | Latches value written | |
| 002C | Ports 002C-0031 latch value written | ||
| 0032 | Latches value written | ||
| 0033 | Latches value written | ||
| 0034 | Latches value written | ||
| 0035 | Latches value written | ||
| 0036 | Ports 0036-0039 latch value written |
