84PCE:Ports:0009
From WikiTI
Revision as of 13:48, 22 August 2022 by Commandblockguy (Talk | contribs)
Synopsis
Port Number: 0009
Function: GPIO A Output
Details
These GPIOs appear to be connected to power control.
Bits [1:0]
Latches value written, no apparent effect.
Bit [2]
Likely connected to the LCD's reset line, which is active low. After being set, the LCD must be given a sequence of initialization commands before it can display an image again.
Bit [3]
Latches value written, no apparent effect. Connected to test point TP06A on rev. C - might be different on newer hardware revisions?
Bit [4]
SPI slave select - reset to communicate with the LCD, set to communicate with the Python coprocessor. Connected to test point TP09A on rev. C - might be different on newer hardware revisions?
Bits [7:5]
Latches value written, no apparent effect.
