Flags Template

Note: Do not take the information on this template page as actual documentation!

The Flags are named by IY offset, in hexadecimal. An example is 83Plus:Flags:2A.

When you put a Flag into categories, you have to make some choices. The By Address part is easy, but for By Name, you can only have one entry. Put the name with the most bits first, then list the other ones too, even though the won't be in order. For example:

[[Category:83Plus:Flags:By Address|01]]
[[Category:83Plus:Flags:By Name|onFlags, fontFlags]]

It's not pretty, but it works.

---

Synopsis

Flag Byte: 01h

Known Names: onFlags, someOtherFlagGroup

Bit Overview

Bit 0

We do not have information on what this bit does, if anything.

Bit 1

Official Name: useLargeFont

This bit controls what font VPutMap uses. Set for large font, reset for small.

Bit 2

Official Name: onInterrupt

This flag is set if the ON key was pressed. You must manually reset it.

Bit 3

We do not have information on what this bit does, if anything.

Bit 4

We do not have information on what this bit does, if anything.

Bit 5

We do not have information on what this bit does, if anything.

Bit 6

We do not have information on what this bit does, if anything.

Bit 7

We do not have information on what this bit does, if anything.

Credits and Contributions

• /sbin/init: Without you, none of this would be possible. :)