83Plus:Ports:05

Synopsis

Port Number: 05h

Function: RAM Paging Port

This port can be used to control what RAM page is paged into the C000h-FFFFh memory bank. Note that it can only page RAM pages (you can't do flash pages.) This port is only avalible on the 83+ Silver Edition and the 84+ Family (on the 83+ Black Edition, it does nothing.)

Read Values

Returns the current RAM page.

Write Values

Sets the current RAM page, by giving a value in 00h-07h, inclusive. When you work with the other paging ports, RAM pages are given in 80h-87h, but this port does not need bit 7 to be set. You cannot set the upper four bits.

Comments

At least on my TI-84+, if you output a value with bit 3 set, reading from the port will return a value with bit 3 set. This would imply that you can use RAM pages 08h-0Fh, but these RAM pages do not exist--this bit is simply ignored (only bits 0-2 actually determine what RAM page is active.)

Credits and Contributions

• Michael Vincent: Initial documentation.