83Plus:BCALLs:505C
From WikiTI
Revision as of 23:23, 26 March 2006 by Premchai21 (Talk | contribs)
Please format this article according to the guidelines and Wikification suggestions, then remove this {{Wikify}} notice from the article.
Synopsis
Unofficial Name: RunCatalog1Hook
BCALL Address: 505C
Checks the first byte at the block for the Catalog 1 Hook. If the byte is 83, the hook is run; otherwise, the active flag for the hook is set to zero.
Inputs
The block for the Catalog 1 Hook must be set up correctly.
Outputs
- HL points to the start of the hook.
- F is 6A if the hook was not run.
Destroys
Unknown.
Comments
This BCALL is known to be present in AMS 1.13, and is undocumented.
Credits and Contributions
- Michael Cimino
