https://wikiti.brandonw.net/index.php?title=83Plus:OS:Raw_Flash_Commands&feed=atom&action=history83Plus:OS:Raw Flash Commands - Revision history2024-03-28T20:58:16ZRevision history for this page on the wikiMediaWiki 1.23.5https://wikiti.brandonw.net/index.php?title=83Plus:OS:Raw_Flash_Commands&diff=11723&oldid=prevFghsgh: add clarifications about 68k and eZ802020-10-04T23:50:20Z<p>add clarifications about 68k and eZ80</p>
<table class='diff diff-contentalign-left'>
<col class='diff-marker' />
<col class='diff-content' />
<col class='diff-marker' />
<col class='diff-content' />
<tr style='vertical-align: top;'>
<td colspan='2' style="background-color: white; color:black; text-align: center;">← Older revision</td>
<td colspan='2' style="background-color: white; color:black; text-align: center;">Revision as of 23:50, 4 October 2020</td>
</tr><tr><td colspan="2" class="diff-lineno">Line 3:</td>
<td colspan="2" class="diff-lineno">Line 3:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>All calculators with an "archive" and upgradable OS have a flash chip whose data can be erased and rewritten. Issuing write and erase commands is done through memory-mapped writes. The flash chip will not accept any commands unless flash is unlocked. Additionally, any read from flash while issuing a command sequence will abort the command sequence. Consequentially, command sequences can only be issued from RAM and the OS interrupt must be disabled. (You can have a custom interrupt if the IVT and ISR are located in RAM.)</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>All calculators with an "archive" and upgradable OS have a flash chip whose data can be erased and rewritten. Issuing write and erase commands is done through memory-mapped writes. The flash chip will not accept any commands unless flash is unlocked. Additionally, any read from flash while issuing a command sequence will abort the command sequence. Consequentially, command sequences can only be issued from RAM and the OS interrupt must be disabled. (You can have a custom interrupt if the IVT and ISR are located in RAM.)</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Note: Although the code on this page is Z80-only, the commands described also apply to eZ80<del class="diffchange diffchange-inline">- and 68K</del>-based calculators that also have flash memory; the flash chips they use accept the same command set. However, <del class="diffchange diffchange-inline">there is one important difference between </del>the <del class="diffchange diffchange-inline">Z80 series and the 68k series. The </del>Z80 series requires to write a 0 over a 0, the <del class="diffchange diffchange-inline">68k </del>series <del class="diffchange diffchange-inline">requires to </del>write a 1 over a 0. In both cases, the resulting bit will be unchanged.</div></td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Note: Although the code on this page is Z80-only, the commands described also apply to eZ80-based calculators that also have flash memory; the flash chips they use accept the same command set. However, the Z80 series requires to write a 0 over a 0, the <ins class="diffchange diffchange-inline">eZ80 </ins>series <ins class="diffchange diffchange-inline">doesn't care if you </ins>write <ins class="diffchange diffchange-inline">a 0 or </ins>a 1 over a 0. In both cases, the resulting bit will be unchanged<ins class="diffchange diffchange-inline">. Furthermore, the eZ80 series' chips have smaller sectors</ins>.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>== Chip documentation ==</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>== Chip documentation ==</div></td></tr>
<tr><td colspan="2" class="diff-lineno">Line 19:</td>
<td colspan="2" class="diff-lineno">Line 19:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>=== Writing ===</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>=== Writing ===</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>The design of flash memory is such that a 0 can be written over a 1, but the reverse is not possible. Any write attempting to do this will fail. To write a 1 over a 0, see the below section. If it is attempted to write a 1 over a 0, the chip may fail to execute the operation. Therefore, it is a best practice to AND the value to be written with the value already there. This differs from the 68k series, where writing a 0 over a 0 will hurt the chip, and writing a 1 over a 0 will not change the value.</div></td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>The design of flash memory is such that a 0 can be written over a 1, but the reverse is not possible. Any write attempting to do this will fail. To write a 1 over a 0, see the below section. If it is attempted to write a 1 over a 0, the chip may fail to execute the operation. Therefore, it is a best practice to AND the value to be written with the value already there. This differs from the 68k series, where writing a 0 over a 0 will hurt the chip, and writing a 1 over a 0 will not change the value<ins class="diffchange diffchange-inline">. On the eZ80 series, both are possible</ins>.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>The write command consists of a series of four writes to memory areas mapping flash. The first two writes inform the flash chip that a command is being issued (preventing accidental writes), the next informs the flash chip what you want to do, and the final gives the address you want to write to and the data to write. If any reads or out-of-sequence writes are performed before the fourth write, the command will be aborted and the actual data write will not take place. Remember to copy flash write/erase code to RAM before execution.</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>The write command consists of a series of four writes to memory areas mapping flash. The first two writes inform the flash chip that a command is being issued (preventing accidental writes), the next informs the flash chip what you want to do, and the final gives the address you want to write to and the data to write. If any reads or out-of-sequence writes are performed before the fourth write, the command will be aborted and the actual data write will not take place. Remember to copy flash write/erase code to RAM before execution.</div></td></tr>
<tr><td colspan="2" class="diff-lineno">Line 87:</td>
<td colspan="2" class="diff-lineno">Line 87:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>=== Erasing ===</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>=== Erasing ===</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>The design of flash memory is such that writing a 1 over a 0 is not possible, except in large blocks known as sectors. The flash chips TI likes to use have sectors that are almost all 64 K in size, except the last, which is broken up into one 32 K sector, two 8 K sectors, and one 16 K sector (in this order). Erase operations take a long time, during which running code from flash is impossible. If you want, you could probably make something blink or something while you're waiting.</div></td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>The design of flash memory is such that writing a 1 over a 0 is not possible, except in large blocks known as sectors. The flash chips TI likes to use have sectors that are almost all 64 K in size, except the last, which is broken up into one 32 K sector, two 8 K sectors, and one 16 K sector (in this order)<ins class="diffchange diffchange-inline">. These are split and grouped into 16 K pages for memory mapping</ins>. Erase operations take a long time, during which running code from flash is impossible. If you want, you could probably make something blink or something while you're waiting.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>The status byte read has the same format as when writing a byte, but bit 7 is of course guaranteed to be reset during the operation, because the target byte is always FF.</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>The status byte read has the same format as when writing a byte, but bit 7 is of course guaranteed to be reset during the operation, because the target byte is always FF.</div></td></tr>
</table>Fghsghhttps://wikiti.brandonw.net/index.php?title=83Plus:OS:Raw_Flash_Commands&diff=11722&oldid=prevTari: Add a link to the AM29F400BT datasheet.2020-10-04T23:43:57Z<p>Add a link to the AM29F400BT datasheet.</p>
<table class='diff diff-contentalign-left'>
<col class='diff-marker' />
<col class='diff-content' />
<col class='diff-marker' />
<col class='diff-content' />
<tr style='vertical-align: top;'>
<td colspan='2' style="background-color: white; color:black; text-align: center;">← Older revision</td>
<td colspan='2' style="background-color: white; color:black; text-align: center;">Revision as of 23:43, 4 October 2020</td>
</tr><tr><td colspan="2" class="diff-lineno">Line 4:</td>
<td colspan="2" class="diff-lineno">Line 4:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>Note: Although the code on this page is Z80-only, the commands described also apply to eZ80- and 68K-based calculators that also have flash memory; the flash chips they use accept the same command set. However, there is one important difference between the Z80 series and the 68k series. The Z80 series requires to write a 0 over a 0, the 68k series requires to write a 1 over a 0. In both cases, the resulting bit will be unchanged.</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>Note: Although the code on this page is Z80-only, the commands described also apply to eZ80- and 68K-based calculators that also have flash memory; the flash chips they use accept the same command set. However, there is one important difference between the Z80 series and the 68k series. The Z80 series requires to write a 0 over a 0, the 68k series requires to write a 1 over a 0. In both cases, the resulting bit will be unchanged.</div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">== Chip documentation ==</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Calculators with parallel Flash use AM29F-series Flash chips, which have a common interface and are made by a number of manufacturers. For more detailed but not calculator-specific documentation, refer to [[File:AM29F400BT.pdf]], where AM29F400BT chips were used in early 83+ revisions.</ins></div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>== Basic Flash Commands ==</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>== Basic Flash Commands ==</div></td></tr>
</table>Tarihttps://wikiti.brandonw.net/index.php?title=83Plus:OS:Raw_Flash_Commands&diff=11720&oldid=prevFghsgh: fix accuracy issues, add more info2020-10-04T23:31:49Z<p>fix accuracy issues, add more info</p>
<table class='diff diff-contentalign-left'>
<col class='diff-marker' />
<col class='diff-content' />
<col class='diff-marker' />
<col class='diff-content' />
<tr style='vertical-align: top;'>
<td colspan='2' style="background-color: white; color:black; text-align: center;">← Older revision</td>
<td colspan='2' style="background-color: white; color:black; text-align: center;">Revision as of 23:31, 4 October 2020</td>
</tr><tr><td colspan="2" class="diff-lineno">Line 3:</td>
<td colspan="2" class="diff-lineno">Line 3:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>All calculators with an "archive" and upgradable OS have a flash chip whose data can be erased and rewritten. Issuing write and erase commands is done through memory-mapped writes. The flash chip will not accept any commands unless flash is unlocked. Additionally, any read from flash while issuing a command sequence will abort the command sequence. Consequentially, command sequences can only be issued from RAM and the OS interrupt must be disabled. (You can have a custom interrupt if the IVT and ISR are located in RAM.)</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>All calculators with an "archive" and upgradable OS have a flash chip whose data can be erased and rewritten. Issuing write and erase commands is done through memory-mapped writes. The flash chip will not accept any commands unless flash is unlocked. Additionally, any read from flash while issuing a command sequence will abort the command sequence. Consequentially, command sequences can only be issued from RAM and the OS interrupt must be disabled. (You can have a custom interrupt if the IVT and ISR are located in RAM.)</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Note: Although the code on this page is Z80-only, the commands described also apply to eZ80- and 68K-based calculators that also have flash memory; the flash chips they use accept the same command set.</div></td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Note: Although the code on this page is Z80-only, the commands described also apply to eZ80- and 68K-based calculators that also have flash memory; the flash chips they use accept the same command set<ins class="diffchange diffchange-inline">. However, there is one important difference between the Z80 series and the 68k series. The Z80 series requires to write a 0 over a 0, the 68k series requires to write a 1 over a 0. In both cases, the resulting bit will be unchanged</ins>.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>== Basic Flash Commands ==</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>== Basic Flash Commands ==</div></td></tr>
<tr><td colspan="2" class="diff-lineno">Line 15:</td>
<td colspan="2" class="diff-lineno">Line 15:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>=== Writing ===</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>=== Writing ===</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>The design of flash memory is such that a 0 can be written over a 1, but the reverse is not possible. Any write attempting to do this will fail. To write a 1 over a 0, see the below section.</div></td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>The design of flash memory is such that a 0 can be written over a 1, but the reverse is not possible. Any write attempting to do this will fail. To write a 1 over a 0, see the below section<ins class="diffchange diffchange-inline">. If it is attempted to write a 1 over a 0, the chip may fail to execute the operation. Therefore, it is a best practice to AND the value to be written with the value already there. This differs from the 68k series, where writing a 0 over a 0 will hurt the chip, and writing a 1 over a 0 will not change the value</ins>.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>The write command consists of a series of four writes to memory areas mapping flash. The first two writes inform the flash chip that a command is being issued (preventing accidental writes), the next informs the flash chip what you want to do, and the final gives the address you want to write to and the data to write. If any reads or out-of-sequence writes are performed before the fourth write, the command will be aborted and the actual data write will not take place. Remember to copy flash write/erase code to RAM before execution.</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>The write command consists of a series of four writes to memory areas mapping flash. The first two writes inform the flash chip that a command is being issued (preventing accidental writes), the next informs the flash chip what you want to do, and the final gives the address you want to write to and the data to write. If any reads or out-of-sequence writes are performed before the fourth write, the command will be aborted and the actual data write will not take place. Remember to copy flash write/erase code to RAM before execution.</div></td></tr>
<tr><td colspan="2" class="diff-lineno">Line 21:</td>
<td colspan="2" class="diff-lineno">Line 21:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>The first three writes of the write sequence must be performed to addresses whose bottom 12 bits have a specific value. (TI's code writes to port 6 because they mistakenly believe 16 bits are required.) Specifically, write AA to xxxAAA, 55 to xxx555, A0 to xxxAAA, and then finally write what you want to the page and address you want.</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>The first three writes of the write sequence must be performed to addresses whose bottom 12 bits have a specific value. (TI's code writes to port 6 because they mistakenly believe 16 bits are required.) Specifically, write AA to xxxAAA, 55 to xxx555, A0 to xxxAAA, and then finally write what you want to the page and address you want.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del class="diffchange diffchange-inline">Once the </del>write is <del class="diffchange diffchange-inline">accepted</del>, <del class="diffchange diffchange-inline">keeping checking </del>the <del class="diffchange diffchange-inline">address you want until what you read matches what you want. If you try to write </del>a <del class="diffchange diffchange-inline">1 over a 0</del>, <del class="diffchange diffchange-inline">your code </del>is <del class="diffchange diffchange-inline">likely to freeze</del>, <del class="diffchange diffchange-inline">especially </del>if <del class="diffchange diffchange-inline">you</del>'<del class="diffchange diffchange-inline">re trying to do that </del>to bit <del class="diffchange diffchange-inline">7</del>.</div></td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">When a byte is read while a </ins>write <ins class="diffchange diffchange-inline">operation </ins>is <ins class="diffchange diffchange-inline">in progress</ins>, the <ins class="diffchange diffchange-inline">value returned is </ins>a <ins class="diffchange diffchange-inline">status byte</ins>, <ins class="diffchange diffchange-inline">where bit 7 </ins>is <ins class="diffchange diffchange-inline">the inverse of what it will be when it is finished</ins>, <ins class="diffchange diffchange-inline">and bit 5 will be reset during the operation and set </ins>if <ins class="diffchange diffchange-inline">an error occured. To prevent a race condition inside the flash chip</ins>'<ins class="diffchange diffchange-inline">s circuitry, make sure </ins>to <ins class="diffchange diffchange-inline">check the value again if </ins>bit <ins class="diffchange diffchange-inline">5 is set. After this, reset the chip using the appropriate command mentioned above.</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div> </div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">Please note: this code needs to be rewritten</ins>.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>  <nowiki></div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>  <nowiki></div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>writeFlashByte:</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>writeFlashByte:</div></td></tr>
<tr><td colspan="2" class="diff-lineno">Line 81:</td>
<td colspan="2" class="diff-lineno">Line 83:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>=== Erasing ===</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>=== Erasing ===</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>The design of flash memory is such that writing a 1 over a 0 is not possible, except in large blocks known as sectors. The flash chips TI likes to use have sectors that are almost all 64 K in size, except the last <del class="diffchange diffchange-inline">which</del>, which is broken up into <del class="diffchange diffchange-inline">several </del>sectors. Erase operations take a long time, during which running code from flash is impossible. If you want, you could probably make something blink or something while you're waiting.</div></td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>The design of flash memory is such that writing a 1 over a 0 is not possible, except in large blocks known as sectors. The flash chips TI likes to use have sectors that are almost all 64 K in size, except the last, which is broken up into <ins class="diffchange diffchange-inline">one 32 K sector, two 8 K </ins>sectors<ins class="diffchange diffchange-inline">, and one 16 K sector (in this order)</ins>. Erase operations take a long time, during which running code from flash is impossible. If you want, you could probably make something blink or something while you're waiting<ins class="diffchange diffchange-inline">.</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div> </div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">The status byte read has the same format as when writing a byte, but bit 7 is of course guaranteed to be reset during the operation, because the target byte is always FF.</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div> </div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">Please note: this code needs to be rewritten</ins>.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>  <nowiki></div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>  <nowiki></div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>eraseSector:</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>eraseSector:</div></td></tr>
<tr><td colspan="2" class="diff-lineno">Line 150:</td>
<td colspan="2" class="diff-lineno">Line 156:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>=== Full Chip Erase ===</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>=== Full Chip Erase ===</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>Do not use this command under any circumstances. It will fully brick your calculator by means of erasing the boot sector(s) (and everything else). (For the skeptics, this has actually been tested.)</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>Do not use this command under any circumstances. It will fully brick your calculator by means of erasing the boot sector(s) (and everything else). (For the skeptics, this has actually been tested.)</div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">The command itself is not included here for obvious reasons. In the odd case you would need it (you wouldn't), you can find it in the original datasheet.</ins></div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>== Autoselect Mode ==</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>== Autoselect Mode ==</div></td></tr>
<tr><td colspan="2" class="diff-lineno">Line 211:</td>
<td colspan="2" class="diff-lineno">Line 219:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>Thus, a TI-83+SE and a TI-84+SE should both have C4 for the device ID; a TI-84+ should have DA for the device ID; and a TI-83+ should have 23 or B9 for the device.</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>Thus, a TI-83+SE and a TI-84+SE should both have C4 for the device ID; a TI-84+ should have DA for the device ID; and a TI-83+ should have 23 or B9 for the device.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>If you swap the first page of any sector into the 4000h memory bank and read from 4004h (or 6004h for the second half of 8 K pages), it will return whether or not that sector is protected by the flash chip's built-in write/erase lock. The older TI-83+SE and TI-84+/SE units did not use the lock feature on the boot sector(s), so they return 0 for all sectors. The TI-84+CSE and TI-84+/SEs manufactured <del class="diffchange diffchange-inline">after </del>2013 DO, however, have their boot sectors locked. The flash chip's lock feature can only be overridden by applying 12 V to the correct pin. (Applying 12 V to the wrong pin will probably fry the chip.)</div></td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>If you swap the first page of any sector into the 4000h memory bank and read from 4004h (or 6004h for the second half of 8 K pages), it will return whether or not that sector is protected by the flash chip's built-in write/erase lock. The older TI-83+SE and TI-84+/SE units did not use the lock feature on the boot sector(s), so they return 0 for all sectors. The TI-84+CSE and TI-84+/SEs manufactured <ins class="diffchange diffchange-inline">from </ins>2013 <ins class="diffchange diffchange-inline">up till an unknown date (before 2016) </ins>DO, however, have their boot sectors locked. The flash chip's lock feature can only be overridden by applying 12 V to the correct pin. (Applying 12 V to the wrong pin will probably fry the chip.)</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>It appears that TI used to use the flash chip's locking feature on the original TI-83+, because older units read 01 for sector 1Fh. (Older units read 23 for the device ID, and newer units read B9 for the device ID. It is possible that the switch to the B9 devices occurred at the same time as the switch to the ASIC for the TI-83+.) However, since at least 2007, TI has not used the locking feature on the TI-83+. These units always read 0. Therefore, it is still possible that the ASIC supports unlocking the boot sector of these units.</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>It appears that TI used to use the flash chip's locking feature on the original TI-83+, because older units read 01 for sector 1Fh. (Older units read 23 for the device ID, and newer units read B9 for the device ID. It is possible that the switch to the B9 devices occurred at the same time as the switch to the ASIC for the TI-83+.) However, since at least 2007, TI has not used the locking feature on the TI-83+. These units always read 0. Therefore, it is still possible that the ASIC supports unlocking the boot sector of these units.</div></td></tr>
</table>Fghsghhttps://wikiti.brandonw.net/index.php?title=83Plus:OS:Raw_Flash_Commands&diff=11539&oldid=prevJacobly at 02:48, 12 July 20182018-07-12T02:48:23Z<p></p>
<table class='diff diff-contentalign-left'>
<col class='diff-marker' />
<col class='diff-content' />
<col class='diff-marker' />
<col class='diff-content' />
<tr style='vertical-align: top;'>
<td colspan='2' style="background-color: white; color:black; text-align: center;">← Older revision</td>
<td colspan='2' style="background-color: white; color:black; text-align: center;">Revision as of 02:48, 12 July 2018</td>
</tr><tr><td colspan="2" class="diff-lineno">Line 3:</td>
<td colspan="2" class="diff-lineno">Line 3:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>All calculators with an "archive" and upgradable OS have a flash chip whose data can be erased and rewritten. Issuing write and erase commands is done through memory-mapped writes. The flash chip will not accept any commands unless flash is unlocked. Additionally, any read from flash while issuing a command sequence will abort the command sequence. Consequentially, command sequences can only be issued from RAM and the OS interrupt must be disabled. (You can have a custom interrupt if the IVT and ISR are located in RAM.)</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>All calculators with an "archive" and upgradable OS have a flash chip whose data can be erased and rewritten. Issuing write and erase commands is done through memory-mapped writes. The flash chip will not accept any commands unless flash is unlocked. Additionally, any read from flash while issuing a command sequence will abort the command sequence. Consequentially, command sequences can only be issued from RAM and the OS interrupt must be disabled. (You can have a custom interrupt if the IVT and ISR are located in RAM.)</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Note: Although the code on this page is Z80-only, the commands described also apply to 68K-based calculators that also have flash memory; the flash chips they use accept the same command set.</div></td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Note: Although the code on this page is Z80-only, the commands described also apply to <ins class="diffchange diffchange-inline">eZ80- and </ins>68K-based calculators that also have flash memory; the flash chips they use accept the same command set.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>== Basic Flash Commands ==</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>== Basic Flash Commands ==</div></td></tr>
</table>Jacoblyhttps://wikiti.brandonw.net/index.php?title=83Plus:OS:Raw_Flash_Commands&diff=10327&oldid=prevDr. D'nar: Updated to reflect the fact that the boot sectors are now locked on new calculators2014-10-21T22:31:09Z<p>Updated to reflect the fact that the boot sectors are now locked on new calculators</p>
<table class='diff diff-contentalign-left'>
<col class='diff-marker' />
<col class='diff-content' />
<col class='diff-marker' />
<col class='diff-content' />
<tr style='vertical-align: top;'>
<td colspan='2' style="background-color: white; color:black; text-align: center;">← Older revision</td>
<td colspan='2' style="background-color: white; color:black; text-align: center;">Revision as of 22:31, 21 October 2014</td>
</tr><tr><td colspan="2" class="diff-lineno">Line 211:</td>
<td colspan="2" class="diff-lineno">Line 211:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>Thus, a TI-83+SE and a TI-84+SE should both have C4 for the device ID; a TI-84+ should have DA for the device ID; and a TI-83+ should have 23 or B9 for the device.</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>Thus, a TI-83+SE and a TI-84+SE should both have C4 for the device ID; a TI-84+ should have DA for the device ID; and a TI-83+ should have 23 or B9 for the device.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>If you swap the first page of any sector into the 4000h memory bank and read from 4004h, it will return whether or not that sector is protected by the flash chip's built-in write/erase lock. <del class="diffchange diffchange-inline">This always returns 0 on all </del>TI-83+SE and TI-84+/<del class="diffchange diffchange-inline">SEs because TI has never used </del>the <del class="diffchange diffchange-inline">locking </del>feature <del class="diffchange diffchange-inline">in those units</del>.  </div></td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>If you swap the first page of any sector into the 4000h memory bank and read from 4004h <ins class="diffchange diffchange-inline">(or 6004h for the second half of 8 K pages)</ins>, it will return whether or not that sector is protected by the flash chip's built-in write/erase lock. <ins class="diffchange diffchange-inline">The older </ins>TI-83+SE and TI-84+/<ins class="diffchange diffchange-inline">SE units did not use </ins>the <ins class="diffchange diffchange-inline">lock </ins>feature <ins class="diffchange diffchange-inline">on the boot sector(s), so they return 0 for all sectors. The TI-84+CSE and TI-84+/SEs manufactured after 2013 DO, however, have their boot sectors locked. The flash chip's lock feature can only be overridden by applying 12 V to the correct pin. (Applying 12 V to the wrong pin will probably fry the chip</ins>.<ins class="diffchange diffchange-inline">)</ins></div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>It appears that TI used to use the flash chip's locking feature on the original TI-83+, because older units read 01 for sector 1Fh. (Older units read 23 for the device ID, and newer units read B9 for the device ID. It is possible that the switch to the B9 devices occurred at the same time as the switch to the ASIC for the TI-83+.) However, since at least 2007, TI has not used the locking feature on the TI-83+. These units always read 0. Therefore, it is still possible that the ASIC supports unlocking the boot sector of these units.</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>It appears that TI used to use the flash chip's locking feature on the original TI-83+, because older units read 01 for sector 1Fh. (Older units read 23 for the device ID, and newer units read B9 for the device ID. It is possible that the switch to the B9 devices occurred at the same time as the switch to the ASIC for the TI-83+.) However, since at least 2007, TI has not used the locking feature on the TI-83+. These units always read 0. Therefore, it is still possible that the ASIC supports unlocking the boot sector of these units.</div></td></tr>
</table>Dr. D'narhttps://wikiti.brandonw.net/index.php?title=83Plus:OS:Raw_Flash_Commands&diff=10014&oldid=prevDr. D'nar: better desciption2013-02-23T12:24:32Z<p>better desciption</p>
<table class='diff diff-contentalign-left'>
<col class='diff-marker' />
<col class='diff-content' />
<col class='diff-marker' />
<col class='diff-content' />
<tr style='vertical-align: top;'>
<td colspan='2' style="background-color: white; color:black; text-align: center;">← Older revision</td>
<td colspan='2' style="background-color: white; color:black; text-align: center;">Revision as of 12:24, 23 February 2013</td>
</tr><tr><td colspan="2" class="diff-lineno">Line 1:</td>
<td colspan="2" class="diff-lineno">Line 1:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>[[Category:83Plus:General Hardware Information|Raw Flash Commands]]</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>[[Category:83Plus:General Hardware Information|Raw Flash Commands]]</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>[[Category:84PCSE:General Hardware Information|<del class="diffchange diffchange-inline">Memory Mapping</del>]]</div></td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>[[Category:84PCSE:General Hardware Information|<ins class="diffchange diffchange-inline">Raw Flash Commands</ins>]]</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del class="diffchange diffchange-inline">The TI-83+ through TI-84+SE </del>have a flash chip whose data can be erased and rewritten. Issuing write and erase commands is done through memory-mapped writes. The flash chip will not accept any commands unless flash is unlocked. Additionally, any read from flash while issuing a command sequence will abort the command sequence. Consequentially, command sequences can only be issued from RAM and <del class="diffchange diffchange-inline">interrupts </del>must be disabled. (<del class="diffchange diffchange-inline">Or IM 2 with </del>the <del class="diffchange diffchange-inline">ISR and </del>IVT <del class="diffchange diffchange-inline">entirely </del>in RAM<del class="diffchange diffchange-inline">, I suppose</del>.)</div></td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">All calculators with an "archive" and upgradable OS </ins>have a flash chip whose data can be erased and rewritten. Issuing write and erase commands is done through memory-mapped writes. The flash chip will not accept any commands unless flash is unlocked. Additionally, any read from flash while issuing a command sequence will abort the command sequence. Consequentially, command sequences can only be issued from RAM and <ins class="diffchange diffchange-inline">the OS interrupt </ins>must be disabled. (<ins class="diffchange diffchange-inline">You can have a custom interrupt if </ins>the IVT <ins class="diffchange diffchange-inline">and ISR are located </ins>in RAM.)</div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div> </div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">Note: Although the code on this page is Z80-only, the commands described also apply to 68K-based calculators that also have flash memory; the flash chips they use accept the same command set.</ins></div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>== Basic Flash Commands ==</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>== Basic Flash Commands ==</div></td></tr>
<tr><td colspan="2" class="diff-lineno">Line 13:</td>
<td colspan="2" class="diff-lineno">Line 15:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>=== Writing ===</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>=== Writing ===</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>The design of flash memory is such that a 0 can be written over a 1, but the reverse is not possible. Any write attempting to do this will fail. To write a 1 over a 0, see the below.</div></td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>The design of flash memory is such that a 0 can be written over a 1, but the reverse is not possible. Any write attempting to do this will fail. To write a 1 over a 0, see the below <ins class="diffchange diffchange-inline">section.</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div> </div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">The write command consists of a series of four writes to memory areas mapping flash. The first two writes inform the flash chip that a command is being issued (preventing accidental writes), the next informs the flash chip what you want to do, and the final gives the address you want to write to and the data to write. If any reads or out-of-sequence writes are performed before the fourth write, the command will be aborted and the actual data write will not take place. Remember to copy flash write/erase code to RAM before execution.</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div> </div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">The first three writes of the write sequence must be performed to addresses whose bottom 12 bits have a specific value. (TI's code writes to port 6 because they mistakenly believe 16 bits are required.) Specifically, write AA to xxxAAA, 55 to xxx555, A0 to xxxAAA, and then finally write what you want to the page and address you want.</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div> </div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">Once the write is accepted, keeping checking the address you want until what you read matches what you want. If you try to write a 1 over a 0, your code is likely to freeze, especially if you're trying to do that to bit 7</ins>.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>  <nowiki></div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>  <nowiki></div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>writeFlashByte:</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>writeFlashByte:</div></td></tr>
<tr><td colspan="2" class="diff-lineno">Line 107:</td>
<td colspan="2" class="diff-lineno">Line 115:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div> ld a, 55h ; Fifth bus cycle---unlock (again)</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div> ld a, 55h ; Fifth bus cycle---unlock (again)</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div> ld (0555h), a</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div> ld (0555h), a</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div> ld a, 30h ; Do not change this value. <del class="diffchange diffchange-inline">In theory, you </del>could superbrick your calculator.</div></td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div> ld a, 30h ; Do not change this value. <ins class="diffchange diffchange-inline">You </ins>could superbrick your calculator.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div> ld (hl), a</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div> ld (hl), a</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>; Wait for the erase operation to complete</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>; Wait for the erase operation to complete</div></td></tr>
</table>Dr. D'narhttps://wikiti.brandonw.net/index.php?title=83Plus:OS:Raw_Flash_Commands&diff=9996&oldid=prevDr. D'nar: category2013-02-22T01:45:17Z<p>category</p>
<table class='diff diff-contentalign-left'>
<col class='diff-marker' />
<col class='diff-content' />
<col class='diff-marker' />
<col class='diff-content' />
<tr style='vertical-align: top;'>
<td colspan='2' style="background-color: white; color:black; text-align: center;">← Older revision</td>
<td colspan='2' style="background-color: white; color:black; text-align: center;">Revision as of 01:45, 22 February 2013</td>
</tr><tr><td colspan="2" class="diff-lineno">Line 1:</td>
<td colspan="2" class="diff-lineno">Line 1:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>[[Category:83Plus:General Hardware Information|Raw Flash Commands]]</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>[[Category:83Plus:General Hardware Information|Raw Flash Commands]]</div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">[[Category:84PCSE:General Hardware Information|Memory Mapping]]</ins></div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>The TI-83+ through TI-84+SE have a flash chip whose data can be erased and rewritten. Issuing write and erase commands is done through memory-mapped writes. The flash chip will not accept any commands unless flash is unlocked. Additionally, any read from flash while issuing a command sequence will abort the command sequence. Consequentially, command sequences can only be issued from RAM and interrupts must be disabled. (Or IM 2 with the ISR and IVT entirely in RAM, I suppose.)</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>The TI-83+ through TI-84+SE have a flash chip whose data can be erased and rewritten. Issuing write and erase commands is done through memory-mapped writes. The flash chip will not accept any commands unless flash is unlocked. Additionally, any read from flash while issuing a command sequence will abort the command sequence. Consequentially, command sequences can only be issued from RAM and interrupts must be disabled. (Or IM 2 with the ISR and IVT entirely in RAM, I suppose.)</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
</table>Dr. D'narhttps://wikiti.brandonw.net/index.php?title=83Plus:OS:Raw_Flash_Commands&diff=9955&oldid=prevDr. D'nar: Added 4 MB chip2013-02-19T04:13:15Z<p>Added 4 MB chip</p>
<table class='diff diff-contentalign-left'>
<col class='diff-marker' />
<col class='diff-content' />
<col class='diff-marker' />
<col class='diff-content' />
<tr style='vertical-align: top;'>
<td colspan='2' style="background-color: white; color:black; text-align: center;">← Older revision</td>
<td colspan='2' style="background-color: white; color:black; text-align: center;">Revision as of 04:13, 19 February 2013</td>
</tr><tr><td colspan="2" class="diff-lineno">Line 196:</td>
<td colspan="2" class="diff-lineno">Line 196:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>|2 MB</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>|2 MB</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>|C4</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>|C4</div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">|-</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">|4 MB</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">|A7</ins></div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>|}</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>|}</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>Thus, a TI-83+SE and a TI-84+SE should both have C4 for the device ID; a TI-84+ should have DA for the device ID; and a TI-83+ should have 23 or B9 for the device.</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>Thus, a TI-83+SE and a TI-84+SE should both have C4 for the device ID; a TI-84+ should have DA for the device ID; and a TI-83+ should have 23 or B9 for the device.</div></td></tr>
</table>Dr. D'narhttps://wikiti.brandonw.net/index.php?title=83Plus:OS:Raw_Flash_Commands&diff=9905&oldid=prevKermMartian: /* Autoselect Mode */2012-10-22T04:32:18Z<p><span dir="auto"><span class="autocomment">Autoselect Mode</span></span></p>
<table class='diff diff-contentalign-left'>
<col class='diff-marker' />
<col class='diff-content' />
<col class='diff-marker' />
<col class='diff-content' />
<tr style='vertical-align: top;'>
<td colspan='2' style="background-color: white; color:black; text-align: center;">← Older revision</td>
<td colspan='2' style="background-color: white; color:black; text-align: center;">Revision as of 04:32, 22 October 2012</td>
</tr><tr><td colspan="2" class="diff-lineno">Line 178:</td>
<td colspan="2" class="diff-lineno">Line 178:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>|-</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>|-</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>|Macronix</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>|Macronix</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>|<del class="diffchange diffchange-inline">C4</del></div></td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>|<ins class="diffchange diffchange-inline">C2</ins></div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>|}</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>|}</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>Though the manufacturer ID changes from unit to unit, the device ID should be consistent:</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>Though the manufacturer ID changes from unit to unit, the device ID should be consistent:</div></td></tr>
</table>KermMartianhttps://wikiti.brandonw.net/index.php?title=83Plus:OS:Raw_Flash_Commands&diff=9883&oldid=prevDr. D'nar: Slight grammar-nazi-ish clarification2012-02-20T18:58:45Z<p>Slight grammar-nazi-ish clarification</p>
<table class='diff diff-contentalign-left'>
<col class='diff-marker' />
<col class='diff-content' />
<col class='diff-marker' />
<col class='diff-content' />
<tr style='vertical-align: top;'>
<td colspan='2' style="background-color: white; color:black; text-align: center;">← Older revision</td>
<td colspan='2' style="background-color: white; color:black; text-align: center;">Revision as of 18:58, 20 February 2012</td>
</tr><tr><td colspan="2" class="diff-lineno">Line 140:</td>
<td colspan="2" class="diff-lineno">Line 140:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>=== Full Chip Erase ===</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>=== Full Chip Erase ===</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Do not use this command under any circumstances. It will fully brick your calculator by means of erasing the boot sector (and everything else). (For the skeptics, this has actually been tested.)</div></td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Do not use this command under any circumstances. It will fully brick your calculator by means of erasing the boot sector<ins class="diffchange diffchange-inline">(s) </ins>(and everything else). (For the skeptics, this has actually been tested.)</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>== Autoselect Mode ==</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>== Autoselect Mode ==</div></td></tr>
</table>Dr. D'nar