83Plus:Ports:05

From WikiTI
Revision as of 19:38, 12 April 2007 by Taricorp (Talk | contribs)

Jump to: navigation, search

Synopsis (TI-83 Plus S.E. and TI-84 Plus Family)

Port Number: 05h

Function: RAM Paging Port

This port can be used to control what RAM page is paged into the C000h-FFFFh memory bank. Note that it can only map RAM pages, not flash pages.

Read Values

Returns the current RAM page.

Write Values

Sets the current RAM page, by giving a value in 00h-07h, inclusive.

Synopsis (TI-83 Plus)

Port Number: 05h

Function: Port 16h Configuration Port/Link Assist Read

This port configures which memory pages are locked or unlocked (i.e. whether or not the PC register is allowed to point within the page) by port 16h. Only bits 0..2 are considered, the rest have no effect. Also, this port is used to read the last byte the link assist received.

Read Values

The last byte received by the link assist (see port 0 for more information).

Write Values

Writing a set bit to 16h protects the page; writing a clear bit unprotects the page. The value of port 05h affects which bits of port 16h are acted on. An 'X' in the table indicates the bit is ignored.

Port 05h Bit Port 16h Bit
2 1 0 7 6 5 4 3 2 1 0
0 0 0 ROM 0F ROM 0E ROM 0D ROM 0C ROM 0B ROM 0A ROM 09 ROM 08
0 0 1 ROM 17 ROM 16 ROM 15 ROM 14 ROM 13 ROM 12 ROM 11 ROM 10
0 1 0 X X X X ROM 1B ROM 1A ROM 19 ROM 18
1 1 1 X X RAM 01 X X X X RAM 00

Comments

At least on my TI-84+, if you output a value with bit 3 set, reading from the port will return a value with bit 3 set. This would imply that you can use RAM pages 08h-0Fh, but these RAM pages do not exist--this bit is simply ignored (only bits 0-2 actually determine what RAM page is active.)

Credits and Contributions

  • Michael Vincent: Initial documentation.
  • Tijl Coosemans: Documenting TI-83 Plus functionality here.