Difference between revisions of "83Plus:Ports:2F"

From WikiTI
Jump to: navigation, search
m (Minor mistake)
m (Write Values: contorl --> control, x3 (aka typo squad))
Line 16: Line 16:
  
 
=== Write Values ===
 
=== Write Values ===
* Bits 0-1 contorl the amount of time when port 20 contains 1. The following values tell the amount of time.
+
* Bits 0-1 control the amount of time when port 20 contains 1. The following values tell the amount of time.
 
** 00 = ~3.2 microseconds
 
** 00 = ~3.2 microseconds
 
** 01 = ~7.4 microseconds
 
** 01 = ~7.4 microseconds
Line 22: Line 22:
 
** 11 = ~16.0 microseconds
 
** 11 = ~16.0 microseconds
  
* Bits 2-4 contorl the amount of time when port 20 contains 2. The following values tell the amount of time.
+
* Bits 2-4 control the amount of time when port 20 contains 2. The following values tell the amount of time.
 
** 000 = ~3.2 microseconds
 
** 000 = ~3.2 microseconds
 
** 001 = ~7.4 microseconds
 
** 001 = ~7.4 microseconds
Line 32: Line 32:
 
** 111 = ~33.0 microseconds
 
** 111 = ~33.0 microseconds
  
* Bits 5-7 contorl the amount of time when port 20 contains 3. The following values tell the amount of time.
+
* Bits 5-7 control the amount of time when port 20 contains 3. The following values tell the amount of time.
 
** 000 = ~3.2 microseconds
 
** 000 = ~3.2 microseconds
 
** 001 = ~7.4 microseconds
 
** 001 = ~7.4 microseconds
Line 41: Line 41:
 
** 110 = ~28.8 microseconds
 
** 110 = ~28.8 microseconds
 
** 111 = ~33.0 microseconds
 
** 111 = ~33.0 microseconds
 
  
 
== Comments ==
 
== Comments ==

Revision as of 06:53, 23 August 2005

This port only exists as a distinct port on the TI-83 Plus Silver Edition, the TI-84 Plus, and the TI-84 Plus Silver Edition. On the standard TI-83 Plus, it acts as a shadow of port 07.

Synopsis

Port Number: 2Fh

Function: LCD Wait Delay

After every write to the LCD bit 1 of port 2 resets for a certain amount of time. This port controls that amount time.


Read Values

  • This port reads the last vaule written to it.


Write Values

  • Bits 0-1 control the amount of time when port 20 contains 1. The following values tell the amount of time.
    • 00 = ~3.2 microseconds
    • 01 = ~7.4 microseconds
    • 10 = ~11.7 microseconds
    • 11 = ~16.0 microseconds
  • Bits 2-4 control the amount of time when port 20 contains 2. The following values tell the amount of time.
    • 000 = ~3.2 microseconds
    • 001 = ~7.4 microseconds
    • 010 = ~11.7 microseconds
    • 011 = ~16.0 microseconds
    • 100 = ~20.2 microseconds
    • 101 = ~24.5 microseconds
    • 110 = ~28.8 microseconds
    • 111 = ~33.0 microseconds
  • Bits 5-7 control the amount of time when port 20 contains 3. The following values tell the amount of time.
    • 000 = ~3.2 microseconds
    • 001 = ~7.4 microseconds
    • 010 = ~11.7 microseconds
    • 011 = ~16.0 microseconds
    • 100 = ~20.2 microseconds
    • 101 = ~24.5 microseconds
    • 110 = ~28.8 microseconds
    • 111 = ~33.0 microseconds

Comments

This value really shouldn't be changed. TI-OS depends on this being set high enough to function for the LCD delay.

Also the 83+SE has this port set to 4A as defualt, the 84+(SE) has this port set to 4B as defualt.


Credits and Contributions

  • James Montelongo