Difference between revisions of "84PCE:Ports:3000"
From WikiTI
(→Synopsis) |
|||
| (2 intermediate revisions by the same user not shown) | |||
| Line 16: | Line 16: | ||
|<u>Information</u> | |<u>Information</u> | ||
|- | |- | ||
| − | |[[:84PCE:Ports: | + | |[[:84PCE:Ports:000F|000F]] |
| | | | ||
|FF | |FF | ||
| − | | | + | |Bit 7 is set if the USB bus is receiving power, Bit 6 is set if the the USB bus is self powered (i.e. there's not a plug A type in the socket) |
|- | |- | ||
|- | |- | ||
| − | |[[:84PCE:Ports: | + | |[[:84PCE:Ports:3104|3104]] |
| | | | ||
|FF | |FF | ||
| − | | | + | |In peripheral mode, the low 7 bits are the USB device address, and the upper bit is set. |
|- | |- | ||
|} | |} | ||
Latest revision as of 22:28, 24 May 2016
Synopsis
Port Number: 3000-?
Memory-mapped Address: E20000
Function: USB
This is the USB controller. It's the Faraday FOTG210. You can find Linux drivers for this IP online, such as this register list: [1].
| Port | Default | Bits | Information |
| 000F | FF | Bit 7 is set if the USB bus is receiving power, Bit 6 is set if the the USB bus is self powered (i.e. there's not a plug A type in the socket) | |
| 3104 | FF | In peripheral mode, the low 7 bits are the USB device address, and the upper bit is set. |
